Maple Leaf Proudly Canadian Owned & Operated Since 1994

Woodturning CA Finish On The Lathe

by Jonathan Downing on February 07, 2022

Today's product that I'll be showing you is the Starbond Super Fast Thin EM-02. You can use this glue for a neat little trick on making lathe applied finish. It works beautifully. I have here a couple of beads that have been sanded up. Apply a small amount of glue for the first coat. Simply rub on it using a cloth to cover the surface. Apply subsequent coats with the lathe turned on. You have be a little bit fast on applying as the glue dries quickly. Continue to rub the glue on the surface until you see a high-gloss finish. As you can see, we have a perfect smooth finish in seconds. There you have it. I hope this article was helpful.