No Products in the Cart
The new TransSteel 3000C Pulse MIG is the most advanced pulse welder in its class! The TransSteel 3000C's
pulse welding programs will increase your speed and penetration all while reducing spatter, rework with a
TIG like "stacked dime" appearance. Once you've tried it, you'll never want to work with any other machine but Fronius!
UNIQUE FEATURES OF THE TRANSSTEEL 3000C MULTI-PROCESS
- MIG: SYNCHROPULSE Stacked dime appearance
using MIG!
- MIG: No spool gun needed for Aluminum!
- MIG: Synergic welding - Set 1 parameter & weld!
- TIG: TIG Pulsing allows for greater puddle control!
- STICK: Hot Start allows for trouble-free ignition!
![]() | 2% THORIATED (RED) EWTh-2/WT20 Radioactive. Best for use in Direct Current (D/C) applications using transformer based constant current power sources. Best for use on non corroding steels, titanium alloys, nickel alloys, copper alloys. Good D/C arc starts and stability, medium erosion rate, medium amperage range, medium tendency to spit. |
![]() | 0.8% ZIRCONIATED (WHITE) EWZr-8/WZ8 Non-Radioactive. Best for use in Alternating Current (A/C) for aluminum alloys and magnesium alloys using inverter or transformer based constant current power sources. Balls well, handles higher amperage than pure tungsten with lesspitting, better arc starts and arc stability than pure tungsten. |
![]() | 1.5% LANTHANATED (GOLD) EWLa-1.5/WL15 Non-Radioactive. Best for use in Direct Current (D/C) as an alternative to 2% Thoriated using inverter or transformer based constant current power sources. Best for non corroding steels, titanium alloys, nickel alloys, copper alloys. Best D/C arc starts and stability, low erosion rate, wide amperage range, no spitting. |
![]() | 2% CERIATED (GRAY) FORMERLY ORANGE EWCe-2/WC20 Non-Radioactive. Best for use in Alternating Current (A/C) or Direct Current (D/C) applications using inverter or transformer based constant current power sources. Good for low-alloyed steels, non corroding steels, aluminum alloys, magnesium alloys, titanium alloys, nickel alloys, copper alloys. Good ignition and re-ignition properties, long service life, excellent arc stability. Low erosion rate, best at low amperage range, no spitting, good D/C arc starts and stability. |
![]() | PURE (GREEN) EWP/WP NON-RADIOACTIVE. Good for use in Alternating Current (A/C) for aluminum alloys and magnesium alloys in low to medium amperage applications using transformer based constant current power sources only. Balls easy, tends to spit at higher amperages. Used for non-critical welds only. |
![]() | 2% LANTHANATED (BLUE) EWLa-2/WL20 Non-Radioactive. Best general purpose electrode for both Alternating Current (A/C) or Direct Current (D/C) using inverter or transformer based constant current power sources. Good for low-alloyed steels, non corroding steels, aluminum alloys, magnesium alloys, titanium alloys, nickel alloys, copper alloys. Good arc starts and stability, medium to high amperage range, low erosion rate. |
![]() | LaYZr™ (CHARTREUSE) EWG Non-Radioactive. Best for automated or robotic applications in Alternating Current (A/C) or Direct Current (D/C) due to low voltage tolerance (changes in tip to work piece distance) using inverter or transformer based constant current power sources. Good for low-alloyed steels, non corroding steels, aluminum alloys, magnesium alloys, titanium alloys, nickel alloys, copper alloys. Very stable tip geometry, runs cooler than 2% Thoriated with longer life, low to medium amperage range. Very best low amperage starts |