1/2"SH, 1/2"CD, 1-1/2"CL Product Description These spiral bits offer state-of-the-art results in flush trimming. Made from solid carbide, each bit contains up cut and down cut flutes and is tipped with...
The "ULTIMATE" Flush Trim Bit has a compression design to provide the ultimate cut when using templates. These bits leave a crisp, clean edge on both the top and bottom...
1/2"SH, 7/8"CD, 1-1/8"CL Product Description The "ULTIMATE" Flush Trim Bit has a compression design to provide the ultimate cut when using templates. These bits leave a crisp, clean edge on...
1/4"SH, 1/8"R, 7/16"CL Product Description Extra small brass pilot (5/32†dia.) allows these bits to roundover edges on finely detailed workpieces with intricate contours, tight confines, and narrow openings. These...
1/2"SH, 1/4"R, 1-1/4"CD Product Description Bowl and Tray bits were designed as an alternate cutting shape to the traditional Round Nose. These bits have a flat bottom so that ridges...
1/4"SH, 1/2"CD, 1/8"CL Product Description Template bits usually consist of a straight bit with a bearing. Simply align the bearing with your template and cut out your project 3000A Spec ...
1/4"SH, 1/2"CD, 1/4"CL Product Description Template bits usually consist of a straight bit with a bearing. Simply align the bearing with your template and cut out your project. 3000 Spec ...
1/4"SH, 1/4"CL Product Description Made from solid carbide, these bits are perfect for flush trimming veneers or laminates. They are designed with a single flute and solid carbide pilot to...
Proudly Canadian Owned & Operated Since 1994
