R2 Square Carbide Insert Cutter

R2 Square Carbide Insert Cutter only for 70-800. 14mm Square with 2-inch radius cutting edges is ideal for quick shaping of turnings down close to your final design, where other cutters can then take over for the clean, finish cuts.

• Carbide Insert Cutter
• Can be resharpened
• For use with 70-800 RIKON Woodturning System

Turners Tool Wrap

• Full Size: 35” x 13”
• Fits up to 17 turning tools
• Rolls up for easy storage
• Holds tools up to 16” long
• Folded Size: 17-1/4” x 13”
• Made from durable 600 x 600 Denier Fabric
• Quick release buckle to secure when rolled

Universal Stand For Mini And Midi Lathes

Universal Stand for Mini and MIDI Lathes

• Steel stand fits variety of mini and midi lathe models
• Length adjusts from 23-1/2″ to 37-1/4″
• Working height adjusts from 24-1/2″ to 34-1/2″ height from the ground
• Top plates with pre-bored mounting holes measures 6-1/2″ x 8-1/2″

Lathe Stand Extension For 70-910, 70-920

• For use with 70-910, 70-920
• Sturdy tubular steel design
• Powder coat finish
• Extends 70-910 stand to 63-3/4-Inch

Bed Extension For 70-105 Mini Lathe

• For use with 70-105
• Increase capacity between centers on the 70-105
• 21-1/2″ in length
• Cast Iron

Bed Extension For 70-220Vsr Midi Lathe

• For use with 70-220VSR
• Made of heavy cast iron
• Machined bed matches the 70-220VSR lathe for easy sliding of the tailstock for long spindles
• Both ends of the bed extension ends are machined for adding even more extensions to your lathe

16" X 42" Vsr Lathe W Sliding Head, Cast Iron Bed, 1.5Hp 110V

Midi Lathe 12-1/2 X 20 Vsr

• 12-1/2″ Swing / 20″ Between Centers
• 24 Position Index Head
• Easy Access Speed Change
• Nylon Face Plate Washer
• Self Ejecting Tail Stock
• Ability To Add Multiple Extensions

12-1/2” x 20” Variable Speed Midi Lathe #70-220VSR is basically a scaled down, portable version of larger, free-standing lathes using tools rests with 1” diameter posts. Designed and constructed heavier than the mini lathe for

10" X 18" Mini Lathe

• 10″ Swing / 18″ Between Centers
• MT2 Taper For Pen Mandrels
• Easy Access Speed Change
• Nylon Face Plate Washer
• Self Ejecting Tail Stock
• Ability To Add Multiple Extensions

10” x 18” Lathe #70-105 was designed specifically at the request of pen turners who wanted a sturdy, dedicated machine for their craft. This scaled-down, basic mini lathe is constructed of cast iron so vibration is not a

Paisley Right Carbide Insert Cutter Only For 70-800

Paisley Right Carbide Insert Cutter only for 70-800. Companion to the Paisley Left cutter, the reverse curved tip is best used to shape on exteriors of turnings, plus, the long curved outside edge will cut clean arcs in your work.

• Carbide Insert Cutter
• Can be resharpened
• For use with 70-800 RIKON Woodturning System

Paisley Left Carbide Insert Cutter Only For 70-800

Paisley Left Carbide Insert Cutter only for 70-800. Designed for making undercuts behind bowl rims where standard cutters can not reach. Like the Fingernail cutter, this blade can be positioned 90° left to 90° right on the turning tool shaft for your shaping needs.

• Carbide Insert Cutter
• Can be resharpened
• For use with 70-800 RIKON Woodturning System

Fingernail Carbide Insert Cutter Only For 70-800

Fingernail Carbide Insert Cutter only for 70-800. Extended curved profile is ideal for bowl turning. Cutter can be positioned 90° left to 90° right on the turning tool shaft for undercutting, relief cuts.

• Carbide Insert Cutter
• Can be resharpened
• For use with 70-800 RIKON Woodturning System

Semicircle Carbide Insert Cutter Only For 70-800

Semicircle Carbide Insert Cutter only for 70-800. 20mm Diameter gives great shaping of concaves on spindles and bowl interiors.

• Carbide Insert Cutter
• Can be resharpened
• For use with 70-800 RIKON Woodturning System

Detailing Insert For 70-800

Detailing 3/16R Carbide Insert Cutter only for 70-800 Turning Set. Great for adding cove details into turnings. Double ended. Wide ‘V’ cuts can also be made with the cutter’s side shapes.

• Detailing 3/16R Insert Cutter
• Carbide Insert Cutter
• Can be resharpened
• For use with 70-800 RIKON Woodturning System

Diamond Insert For 70-800

Diamond Carbide Insert Cutter only. Mainly used to add thin line details on turnings, the spear-point tip is great for undercutting and creating small beads. The long sides of the cutter are also useful for fine shaping of rims on bowls or plates. Use carefully, as excessive pressure on the tip from hitting knots, irregular wood grain or aggressive use could damage the cutter.

• Diamond Insert Cutter
• Carbide Insert Cutter
• Can be resharpened
• For use with 70-800 RIKON Woodturning System

Square Insert For 70-800

Square Carbide Insert Cutter only. Straight edges on this carbide cutter make it extremely useful for shaping convex or straight surfaces. Ideal for producing tenons for furniture construction. Reposition and use a corner for 90° V-cuts.

• Square Insert Cutter
• Carbide Insert Cutter
• Can be resharpened
• For use with 70-800 RIKON Woodturning System

Round Insert For 70-800

Round Carbide Insert Cutter only. Very effective for finishing cuts on bowl interiors or any cove or contoured designs on bowls and spindles.

• Round Insert Cutter
• Carbide Insert Cutter
• Can be resharpened
• For use with 70-800 RIKON Woodturning System

Model 70-800: 4-Piece WOODTURNING SYSTEM & Carbide Insert Cutters

• System includes a 16” long, machined aluminum Handle with an anti-vibration grip that features a unique forward chucking system

• Three, 8-3/8” steel Shafts are supplied with either a Circle, Square or Diamond shaped carbide Insert Cutter secured to their end with a T20 screw
• The finely machined shafts have bottoms that are milled with a flat, and 2 side bevels for extra stability on the tool rest when turning

Developed for the experienced or novice wood turner, RIKON’s turning system features tungsten carbide cutters that keep their sharp cutting edges longer than typical carbon or high speed steel tools. After hours and

Rikon 8" 1Hp Bench Grinder 1725 Rpm

• Powerful 1 HP Motor
• Motor (No Load) 1,750 RPM
• Adjustable Tool Rests
• Adjustable Safety Eye Shield and Spark Resistors

1 HP Low Speed Bench Grinder #80-808 is a larger size motor and will tackle the tough grinding jobs that are typical in production shops, as well as the finesse shaping and sharpening of hand tools. Tool rests on this machine are extra-large and flat, without a drill bit sharpening groove. Wheel flanges are cast metal. Grinder includes dual dust collection ports on the rear of the wheel guards.

8"Slow Speed Bench Grinder 1750 Rpm

• Powerful 1/2 HP Motor
• Low Speed 1,750 RPM
• Adjustable Tool Rests
• Adjustable Safety Eye Shield and Spark Resistors

1/2 HP Low Speed Bench Grinder #80-805 has more than enough power for small workshops and for carpenters, turners, carvers and other craftspeople working with hand tools. Its left tool rest includes a groove in its design for the sharpening of drill bits. Wheel flanges are stamped. Grinder includes a diamond faced wheel dressing tool.

Side Handle Only For 70-800 Turning System

Side Handle only

• Side Handle only.
• Screws into the side of the 70-801 Handle
• steel side handle
• For use with 70-800 RIKON Woodturning System

Counterweight Only For 70-800 Turning System

• Counterweight only.
• Screws into the rear of the 70-801 Handle
• great for support
• For use with 70-800 RIKON Woodturning System

6" Extension Handle Only For 70-800 Turning System

• 6″ Extension Handle only.
• Screws into the rear of the 70-801 Handle
• aluminum extension
• For use with 70-800 RIKON Woodturning System

8" Buffing Wheel

8″ Spiral Sewn Replacement Buffing Wheel