Store Wide

1/2"SH, 1/2"CD, 1-1/2"CL Product Description These spiral bits offer state-of-the-art results in flush trimming. Made from solid carbide, each bit contains up cut and down cut flutes and is tipped with...

1/2" SHANK Product Description Change your Rabbet depth by changing the bearing! This 1/2" set includes all eight bearings to make 1/8”, 3/16”, 1/4", 1/2", 7/16”, 3/8”, 5/16”, and flush...

  Square Insert Cutter Carbide Insert Cutter Can be resharpened For use with 70-800 RIKON Woodturning System   Square Carbide Insert Cutter only. Straight edges on this carbide cutter make...

1/4"SH, 1/2"CD, 1/4"CL Product Description  Template bits usually consist of a straight bit with a bearing. Simply align the bearing with your template and cut out your project. 3000 Spec ...

1/4"SH, 45°, 7/16"CL Product Description This chamfer bit is designed to cut a 45 degree angle on your work piece. Originally, the bit was specifically designed to fit in trim routers with...

The "ULTIMATE" Flush Trim Bit has a compression design to provide the ultimate cut when using templates. These bits leave a crisp, clean edge on both the top and bottom...

Round Carbide Insert Cutter only. Very effective for finishing cuts on bowl interiors or any cove or contoured designs on bowls and spindles. Round Insert Cutter Carbide Insert Cutter Can...

1/4"SH, 1/2"CD, 1/8"CL Product Description  Template bits usually consist of a straight bit with a bearing. Simply align the bearing with your template and cut out your project 3000A Spec ...

1/2"SH, 45°, 1-1/16"CL Product Description This chamfer bit is designed to cut a 45 degree angle on your work piece. Whether you are using the 45° as a decorative edge...