No Products in the Cart
Proudly Canadian Owned & Operated Since 1994
Proudly Canadian Owned & Operated Since 1994
The MaxCool300 TIG Welding Water Cooler can be attached to your PrimeWeld TIG225X AC/DC TIG Welder to extend weld time.
The MaxCool3000 TIG Welding Water Cooler is compatible with the TIG225X AC/DC TIG Welder and is used to extend weld time. Attaching the MaxCool 3000 Water Cooler to your TIG welder allows for longer duty cycles and cools the torch, making it easier to hold.
The MaxCool3000 holds 2.2 gallons of water, which it keeps cool and cycles through your TIG torch. Gas-cooled TIG torches simply can’t compete with chilled water-cooling technology. The MaxCool3000 is an upgrade that will supercharge your TIG225X.
The MaxCool3000 TIG Welding Water Cooler significantly increases the amount of time your TIG welding machine can function at a high level without overheating. Instead of having to rest your TIG welder after a few minutes of use, the water cooler lets you power through your job, so you get done faster!
To ensure compatibility with your TIG welding machine, please specify which type of TIG welder you have. Using the drop-down menu above, please tell us if your TIG welder has an outlet on the back. We’ll be sure to send you the compatible MaxCool3000 Water Cooler model, depending on your selection.
Need Help? Contact our Customer Service desk by completing the form, or give us a call at 856-537-4368
The MaxCool3000 TIG Welding Water Cooler does not include the CK Worldwide Water-Cooled TIG Torch. The MaxCool3000 Water Cooler requires this torch. The torch is sold separately.
| Motor Input | 115 volts 60 Hz |
| Maximum Current Draw | 1.8 amps |
| Maximum Cooling Capacity | 3760 Watts @ 1,7 /Min or 12,380 Btu/Hr @ 1.8 Qt/Min |
| Rated Cooling Capacity | 1600 Watts @ 1 L/Min or 5460 BTU/Hr @ 1.1 Qt/Min |
| Tank Capacity | 2.2 gallons |
| Dimensions | 14” H x 10” W x 17 ¾” Deep |
| Weight | 30 lbs |
 | 2% THORIATED (RED) EWTh-2/WT20 Radioactive. Best for use in Direct Current (D/C) applications using transformer based constant current power sources. Best for use on non corroding steels, titanium alloys, nickel alloys, copper alloys. Good D/C arc starts and stability, medium erosion rate, medium amperage range, medium tendency to spit. |
 | 0.8% ZIRCONIATED (WHITE) EWZr-8/WZ8 Non-Radioactive. Best for use in Alternating Current (A/C) for aluminum alloys and magnesium alloys using inverter or transformer based constant current power sources. Balls well, handles higher amperage than pure tungsten with lesspitting, better arc starts and arc stability than pure tungsten. |
 | 1.5% LANTHANATED (GOLD) EWLa-1.5/WL15 Non-Radioactive. Best for use in Direct Current (D/C) as an alternative to 2% Thoriated using inverter or transformer based constant current power sources. Best for non corroding steels, titanium alloys, nickel alloys, copper alloys. Best D/C arc starts and stability, low erosion rate, wide amperage range, no spitting. |
 | 2% CERIATED (GRAY) FORMERLY ORANGE EWCe-2/WC20 Non-Radioactive. Best for use in Alternating Current (A/C) or Direct Current (D/C) applications using inverter or transformer based constant current power sources. Good for low-alloyed steels, non corroding steels, aluminum alloys, magnesium alloys, titanium alloys, nickel alloys, copper alloys. Good ignition and re-ignition properties, long service life, excellent arc stability. Low erosion rate, best at low amperage range, no spitting, good D/C arc starts and stability. |
 | PURE (GREEN) EWP/WP NON-RADIOACTIVE. Good for use in Alternating Current (A/C) for aluminum alloys and magnesium alloys in low to medium amperage applications using transformer based constant current power sources only. Balls easy, tends to spit at higher amperages. Used for non-critical welds only. |
 | 2% LANTHANATED (BLUE) EWLa-2/WL20 Non-Radioactive. Best general purpose electrode for both Alternating Current (A/C) or Direct Current (D/C) using inverter or transformer based constant current power sources. Good for low-alloyed steels, non corroding steels, aluminum alloys, magnesium alloys, titanium alloys, nickel alloys, copper alloys. Good arc starts and stability, medium to high amperage range, low erosion rate. |
 | LaYZr™ (CHARTREUSE) EWG Non-Radioactive. Best for automated or robotic applications in Alternating Current (A/C) or Direct Current (D/C) due to low voltage tolerance (changes in tip to work piece distance) using inverter or transformer based constant current power sources. Good for low-alloyed steels, non corroding steels, aluminum alloys, magnesium alloys, titanium alloys, nickel alloys, copper alloys. Very stable tip geometry, runs cooler than 2% Thoriated with longer life, low to medium amperage range. Very best low amperage starts |
