12" Ruler For T-Glide Rails

Blade Wrench For Cb And Ics

Micro-Guard Blade Guard Assembly For Cb, Ics, Pcs And Cns

Contractor Saw Mobile Cart (Formerly Cns-Jsc)E Cart

Industrial Series 36" Rail Assembly A

Table Saw Dado Cartridge For 8 In Dado Sets (Clear) Tsdc-8L

The SawStop TSDC-8L is a Dado Replacement Brake Cartridge for original SawStop saws whose model number starts with "CB". The plastic housing of the cartridge has a clear colouring. The cartridge consists of a spring, fuse wire and brake pawl.

The TSDC-8L stops the blade, retracts the blade below the table surface in 1/200th (3-5 miliseconds) of a second, and shuts down the power for increased safety.

Revolutionary SawStop protection Compatible with all standard 8" dado sets up to 13/16" thick. Compatible with all woods and other non-conductive materials

Table Saw Brake Cartridge For 10" Blades (Clear) - Tsbc-10L

The SawStop TSBC-10L is a Standard Replacement Brake Cartridge for original SawStop saws whose model number starts CB. The plastic housing of the cartridge has a "clear" colouring. The cartridge consists of a spring, fuse wire and brake pawl.

The TSBC-10L stops the blade, retracts the blade below the table surface in 1/200th (3-5 miliseconds) of a second, and shuts down the power for increased safety.

T-Glide Rails Assembly - 52 Inch Professional Series Ii ..

Industrial Series 36" Extension Table Assembly

30" Out-Feed Table (Not Compatible With Any Mobile Base/Cart, Tsa-Sa48, 36" Industrial Fence System Or 30" Contractor Saw Fence System)

Mitre Gauge Assembly For Cb, Ics And Pcs

1.5" Hose Connector

Micro-Guard Top Guard Assembly

Inner Left Shell Half For Dust Guard

Pcs Tilt Indicator

Motor Belt For Pcs

Levelling Adjustment Screw

Fence Tube Glide Plate

Fence Handle

Brake Cartridge Key For Ics, Pcs, Cns, And Jss (With O-Ring)

Riving Knife Clamp Assembly (Including Mounting Bracket, Clamp Bracket And Handle)

Arbor Belt For Cb, Ics And Pcs

Arbor Nut

M5X5X22 Key For Angle Adjustment Handle

Pivot Pin For Cb And Ics

Bypass Key Set

Dust Shroud Door

Belt Access Door Latch For Cb And Ics

Dust Collection Replacement Guard Shell Assembly

Inner Right Shell Half For Dust Guard

Outer Right Guard Shell For Tsg-Dc Dust Collection Blade Guard Assembly

Outer Left Guard Shell For Tsg-Dc Dust Collection Blade Guard Assembly

Tgp2 Face Plate For Pcs And Cns Saws......

Arbor Washer For Jss-Mca

Arbor Nut For Jss

Belt Tensioning Kit For Jss

Motor Belt For Cns

52" Ruler

Cbf 42" Face Plate For..Cb/Ics

Fence Position Indicator Lens For T-Glide Fences

Flex Plate

M4X0.7 Hex Nut ( Cb111 004, Tsg-Dc-027)

2.3Mm Riving Knife

Replacement Switch

Guard Shell Assembly (Including Connecting Screws) For Discontinued Guard Cb104 229

Motor Belt For Cb And Ics

Thumb Screw

Ics Handwheel Handle

Arbor Washer For Ics And Pcs

10Mm E-Style Retaining Ring

Downdraft Dust Collection Box for Router Lift

Engineered to draw the dust down from the router bit and deliver to a 4" port for collection, all while substantially minimizing router noise, SawStop's steel collection box features interchangeable panels for optimum dust port and vent placement.

Plug the 2.25" dust hose from the router fence directly into the dust box's branch inlet, and let the 4" port deliver above and below table dust from the same port.

• Collects below-table dust
• Connects to 4 dust tube
• Compatible with all SawStop Router Tables

SawStop SAW-TGP2T36A T-Glide Extension Table Assembly - 36" Professional Series II

Complete your 52" Professional In-Line Router Table configuration with this extension table for a perfect fit when installed between the rails.

Description: T-Glide Extension Table Assembly - 36 inch Professional Series II

For Use with Saw Type(s): PCS and CNS Model Saws with T-Glide Professional Series II Fence System

Compatibility Notes: Not for use with any other SawStop Model Saws

• Actual dimensions: 27" w, 23 3/4" d, 2 1/4" h
• Compatible with the Professional Cabinet Saw with 52" rip capacity and a SawStop RT router table installed between the rails
• Table made of laminated wood with a matte black finish
• Also fills the space between the rails on a SawStop Professional Cabinet Saw or Contractor Saw with 36" rip capacity without Router Table

Titanium Series 80-Tooth Blade

High-Quality Saw Blade Features: 

• High quality heat treated steel
• Expansion slots help reduce vibration, noise and heat buildup
• Precision balanced
• ATB tooth pattern, 5/8 inch arbor, 3mm kerf, rake angle 15 degre, top angle 10 degree, plate thickness 2mm, tooth thickness 0.079 inch
• 40 Tooth Combination Table Saw Blade: A high quality carbide tipped, every day blade for both rips and cross cuts on a variety of woods
• 60 Tooth Combination Table Saw Blade: A high quality carbide tipped blade for precision cross cuts on soft and hard wood

Titanium Premium Woodworking Blade Features 

• Quality engineered, long-life blade for professional and heavy-duty use
• Extra large teeth made of the highest-grade tungsten carbide resist dulling and can be re-sharpened multiple times
• Laser cut expansion slots help prevent vibration, noise and heat buildup

• 40 Tooth: A premium, precision balanced, fully tensioned and heat treated multi-purpose blade for both rips and cross cuts on a variety of softwoods and hardwoods. ATB, 5/8 inch arbor, 1/8 inchkerf, rake angle 15 inch, top angle 10 degree, plate thickness 0.087 inch, tooth thickness 0.106 inch

• 80 Tooth: A premium, precision balanced, fully tensioned and heat treated high-tooth blade for cutting plywood and solid surfaces like melamine and MDF. High ATB, 5/8 inch arbor, 1/8 inch kerf, Rake angle -5 degree,Top Angle 40 degree, Plate thickness 0.094 inch, Tooth thickness 0.098 inch

Titanium Series 40-Tooth Combination Blade

High-Quality Saw Blade Features: 

• High quality heat treated steel
• Expansion slots help reduce vibration, noise and heat buildup
• Precision balanced
• ATB tooth pattern, 5/8 inch arbor, 3mm kerf, rake angle 15 degre, top angle 10 degree, plate thickness 2mm, tooth thickness 0.079 inch
• 40 Tooth Combination Table Saw Blade: A high quality carbide tipped, every day blade for both rips and cross cuts on a variety of woods
• 60 Tooth Combination Table Saw Blade: A high quality carbide tipped blade for precision cross cuts on soft and hard wood

Titanium Premium Woodworking Blade Features: 

• Quality engineered, long-life blade for professional and heavy-duty use
• Extra large teeth made of the highest-grade tungsten carbide resist dulling and can be re-sharpened multiple times
• Laser cut expansion slots help prevent vibration, noise and heat buildup

• 40 Tooth: A premium, precision balanced, fully tensioned and heat treated multi-purpose blade for both rips and cross cuts on a variety of softwoods and hardwoods. ATB, 5/8 inch arbor, 1/8 inchkerf, rake angle 15 inch, top angle 10 degree, plate thickness 0.087 inch, tooth thickness 0.106 inch

• 80 Tooth: A premium, precision balanced, fully tensioned and heat treated high-tooth blade for cutting plywood and solid surfaces like melamine and MDF. High ATB, 5/8 inch arbor, 1/8 inch kerf, Rake angle -5 degree,Top Angle 40 degree, Plate thickness 0.094 inch, Tooth thickness 0.098 inch

Jobsite Saw Standard Zero Clearance Insert for 10" Blades 

• Engineered for the SawStop Jobsite Saw.
• Zero clearance for accurate cuts and reduced tearout
• One push lockdown allows for tool-free operation
• Positioning screws ensure a solid and precise fit in the table
• Insert for standard 10" blades has pre-formed clearance slots for SawStop blade guard and riving knife

Dado Table Saw Insert with Lock-Down Lever for 8 in Dado

• Precision machined from a high-quality, ultra strong phenolic core material that is covered on top and bottom with a low-friction, wear-resistant melamine surface
• Positioning screws ensure a solid and precise fit in the table
• Positive locking latch allows for tool-free operation
• Pre-formed clearance slots for SawStop blade guard and riving knife (Standard insert only)
  
• Dual metal wear plates for anti-kickback pawls (Standard insert only)
  

Compatible with ICS/PCS/CNS only.

Standard Table Saw Insert with Lock-Down Lever for 10" Blades 

• Precision machined from a high-quality, ultra strong phenolic core material that is covered on top and bottom with a low-friction, wear-resistant melamine surface
• Positioning screws ensure a solid and precise fit in the table
• Positive locking latch allows for tool-free operation
• Pre-formed clearance slots for SawStop blade guard and riving knife (Standard insert only)
  
• Dual metal wear plates for anti-kickback pawls (Standard insert only)
  

Compatible with ICS/PCS/CNS only.

Dust Collecting Blade Guard Assembly

Upgrade your SawStop cast iron table saw with above-table dust collection. Attaches directly to your dust collection system.

• Provides protection around the blade and collects above-table dust, reducing the chance of injury and minimizing the amount of airborne carcinogenic dust
• Independent lateral sides minimize blade exposure, and the low profile guard allows for cuts as narrow as 3/4 of an inch
• Anti-kickback pawls reduce the likelihood of kick-back
• Tool-free, one lever operation allows the users to quickly and easily switch between blade guard and riving knife when making different kinds of cuts
• Compatible with SawStop Overarm Dust Collection accessory
• Compatible with ICS/PCS/CNS only
• Included with 230V saws

Table Saw Dado Cartridge for 8 in Dado sets

Revolutionary SawStop protection!

• Dado brake cartridge stops the spinning blades on contact with skin reducing the chances of a catastrophic injury
• Compatible with all standard 8 inch dado sets up to 13/16 inch thick
• Compatible with all woods and other non-conductive materials
• Easy to switch between the standard brake cartridge and dado brake cartridge when making standard or dado cuts - just one locking key required

Contractor Saw Mobile Base

Easily move your saw around your shop with SawStop's Integrated Mobile Base for the SawStop Contractor Saw. The base is made from fully welded 1/4" rigid steel construction and finished with hard wearing black powder coating.

• Durable polyurethane wheels: Two fixed-direction wheels and two 360° casters for easy positioning
• Easy one-foot operation
• Supports entire table and requires no extension piece even for the 52" extension table

(INCLUDED IN BOX: MB-IND-000, MB-IND-500)

The SawStop Industrial Mobile Base supports the table saw and extension table - no additional extension hardware is required. This base has non-marring polyurethane wheels and supports up to 1000 lb. Instead of relying on flimsy wheel brakes, to immobilize the saw, the machine is lowered down to the ground, distributing weight directly to the floor, not the wheels.

Includes kit to adapt Industrial Mobile Base for use with Professional Cabinet Saw.

• Three quick pumps of the foot petal raises the saw
• Four 360° casters allow the saw to easily move in any direction
• Hydraulic piston assist lift
• High performance full ball bearing casters.

Professional Cabinet Saw Mobile Base

Easily move your SawStop Professional Cabinet Saw (PCS) around your shop with SawStop's Integrated Mobile Base for PCS. The base is built from fully welded 1/4" rigid steel construction and finished with a hard-wearing black powder coating.

• Ergonomic one-foot operation mechanically lifts the saw in a single motion
• When not engaged, the cabinet rests directly on the floor for maximum stability

Industrial Cabinet Saw Mobile Base

The SawStop Industrial Mobile Base supports the SawStop Industrial Cabinet Saw (ICS) and extension table - no additional extension hardware is required. This base has non-marring polyurethane wheels and supports up to 1000 lb. Instead of relying on flimsy wheel brakes, to immobilize the saw, the machine is lowered down to the ground, distributing weight directly to the floor, not the wheels.

• Three quick pumps of the foot petal raises the saw
• Four 360° casters allow the saw to easily move in any direction
• Hydraulic piston assist lift
• High performance full ball bearing casters

Folding Outfeed Table

Engineered from steel for maximum carrying capacity, SawStop's folding outfeed table is sized to match the width of your cast iron table and wings. The table is designed for easy adjustability and maximum glide, with strategically-placed rollers for smooth operation. Compatible with all SawStop Cast Iron Table Saw mobile bases, the Folding Outfeed Table quickly stows for moving or freeing up valuable floor space when not needed.

• Powder coated steel construction
• Stamped steel support plate
• Three roller bars
• 250lbs capacity

Overarm Dust Collection Assembly

SawStop's Overarm Dust Collection connects directly to SawStop's Dust Collection Blade Guard and keeps the hose (and dust!) out of the working area.

• Fits all SawStop T-Glide rail systems
• Custom Y-Port unites above and below-table dust collection into one 4" port.
• Compatible with all SawStop Cast Iron saws (JSS not included)
• Not compatible with Contractor Saw 30" rail kit CNS-SFA
• Requires dust collection blade guard TSG-DC (included with 230V saws)

Floating Overarm Dust Collection Guard

This heavy-duty 4" overarm is designed to provide operator protection while removing table-top dust in both standard and non-through cuts. The transparent blade cover is engineered to lift easily for quick blade access, and the rigid steel overarm swings smoothly away and back into operating position. The wide pipe allows for high air volume collection.

• Blade guard dimensions 3-1/2" x 18-1/2"
• Distance between blade and end of extension table 35 3/4" to 68"
• Inner dust tube diameter 3"
• Outer dust tube diameter 4"
• Outer dust tube height above table 13 1/2"
• Outer dust tube height above floor 33 1/2" to 50"

Sliding Crosscut Table Attachment

Engineered and finished to fit your SawStop Contractor, Professional Cabinet or Industrial Cabinet Saw, the Sliding Crosscut Table is the finest quality crosscut table available. It delivers repeatable, accurate results with ease and beauty.

• Built for versatility - adjust the table to suit your needs
• Easily slide the fence in for blade proximity, and choose a flush or "maximum throw" installation to fit your shop and space requirements
• Micro-adjust for detail cuts, and crosscut full sheets with the 55" travel and 48" crosscut capacity
• Crosscut fence is at least 15% larger than typical crosscut sliders, spanning 43" and extending past 58".
• Oversize fence miter turns at the twist of a single knob, and measures to a full 60 degrees
• Large flip-stops with scale and magnified lenses help ensure accurate, repeatable cuts every time

Large Sliding Table

Engineered for the demands of the Industrial woodshop, the SawStop Large Format Sliding Table ensures easy, repeatable operation. Cut sheet goods and larger stock easily, with maximum control and sure measurement. A rigid steel frame and 14 sealed, steel bearings ensure a reliable, smooth glide, and maximum adjustability affords both traditional and Euro configurations for a max crosscut of 70 inches.

• Table Dimensions 30" x 30-1/2"
• Maximum Travel 71-1/2"
• Maximum Crosscut Capacity 118 (On PCS without Extension Wing)
• Maximum Rip Capacity (Front Mounting) 49
• Maximum Rip Capacity (rear mounting) 70
• Weight Capacity Fully Extended 350lbs

30" Contractor Aluminum Fence System

Contractor 1.75HP 120V 60Hz (saw body)

52" Professional T-Glide Fence System

30" Premium Fence System

• Precision T-style design (T-Glide),
• Smooth operation and incredible precision
• Heavy-Duty Welded Construction,
• Dual measuring scales for positioning the fence on either the right or the left of the blade,
• Easily adjustable and removable face plates with high gloss melamine surfaces,
• Strong, ergonomic locking handle,
• Powder coated finish.
• Rails and table included
• Dual measuring scales for positioning the fence on either the right or the left of the blade

Professional 1.75HP 120V 60Hz (saw body)

Industrial 5HP 3ph 230V 60Hz 52" Industrial T-Glide Fence System

The SawStop Industrial Cabinet Saw is the definition of industrial grade. It is the heaviest, most powerful and highest quality 10" cabinet saw available. This table saw offers the durability, versatility, and the peace of mind only SawStop's patented safety system can provide.

• Durable craftmanship and thoughtful details combine for consistent, reliable performance in the most demanding industrial environments.
• SawStop Safety System stops on contact with skin.
• Industrial T-Glide Fence System provides smooth operation, precision measurement and sure lockdown without deflection.

Industrial 3HP 1ph 230V 60Hz 52" Industrial T-Glide Fence System

The SawStop Industrial Cabinet Saw is the definition of industrial grade. It is the heaviest, most powerful and highest quality 10" cabinet saw available. This table saw offers the durability, versatility, and the peace of mind only SawStop's patented safety system can provide.

• Durable craftmanship and thoughtful details combine for consistent, reliable performance in the most demanding industrial environments.
• SawStop Safety System stops on contact with skin.
• Industrial T-Glide Fence System provides smooth operation, precision measurement and sure lockdown without deflection.