Maple Leaf   Proudly Canadian Owned & Operated Since 1994
AccuPocket 150/400 Battery Powered TIG Welding Machine
AccuPocket 150/400 Battery Powered TIG Welding Machine
AccuPocket 150/400 Battery Powered TIG Welding Machine
  • SKU: 4904100066

AccuPocket 150/400 Battery Powered TIG Welding Machine

$6,529.95

Availability:   Usually in Stock and Ships in 1-2 Days

FRONIUS ACCUPOCKET 150/400 TIG

They said that it couldn't be done, they said that it would never work, they said -  don't waste your time!  Well Fronius thought otherwise and is proud to introduce the worlds first cordless welder! 

With the AccuPocket 150 battery powered stick and TIG welding machine access to electricity is no longer necessary. No more cables, generators or trucks! Welding tasks involving up to eight 1/8" or up to eighteen 3/32 electrodes can be carried out anywhere, any time without any restrictions on welding power or the quality of the arc. The AccuPocket TIG also has a high frequency start avoiding scratch starts that foul your tungsten. For welding applications requiring more run time, the AccuPocket can be plugged into a 120V source and operated just like any other stick welding machine, even if the battery is dead!  Charging can also be done incredibly fast, with 80% charge possible in 30 minutes  With its small dimensions, low weight and robust construction, the AccuPocket is the perfect welding machine for any service job, field work or mobile repair. 

  • Hot Start - To make the electrode easier to ignite, the current at the power source is increased for a fraction of a second during ignition. The HotStart function was specially developed for welding with rutile and Cel electrodes.
  • SoftStart - The SoftStart function ensures a stable arc at the start of welding and was specially developed for electrodes that are welded with a low welding current (basic electrodes).
  • Anti-Stick - If a short circuit occurs that causes the electrode to stick during MMA welding, the power source is switched off immediately. This prevents the electrode from burning out.
  • Internal Gas Solenoid - Shielding gas for TIG is controlled by an internal control valve with pre-flow and post-flow settings
  • 3 Year Fronius Warranty with product registration.  


 

  • AccuPocket 150 Stick/TIG Welding Machine
  • ActiveCharger 1000
  • TIG Torch
  • Gas Hose
  • 13ft Ground Cable
  • 13ft Electrode Cable
  • Fronius Gloves
  • Hand Held Face Shield
  • Fronius Chipping Hammer
  • Tool case with shoulder strap and wheels ($425 value)
 

2% THORIATED (RED) EWTh-2/WT20
Principal Oxide: 1.7–2.2% Thorium Oxide

Radioactive. Best for use in Direct Current (D/C) applications using transformer based constant current power sources. Best for use on non corroding steels, titanium alloys, nickel alloys, copper alloys. Good D/C arc starts and stability, medium erosion rate, medium amperage range, medium tendency to spit.

0.8% ZIRCONIATED  (WHITE)  EWZr-8/WZ8
Principal Oxide: 0.7–0.9% Zirconium Oxide

Non-Radioactive. Best for use in Alternating Current (A/C) for aluminum alloys and magnesium alloys using inverter or transformer based constant current power sources. Balls well, handles higher amperage than pure tungsten with lesspitting, better arc starts and arc stability than pure tungsten.

1.5% LANTHANATED (GOLD) EWLa-1.5/WL15
Principal Oxide: 1.3–1.7% Lanthanum Oxide

Non-Radioactive. Best for use in Direct Current (D/C) as an alternative to 2% Thoriated using inverter or transformer based constant current power sources. Best for non corroding steels, titanium alloys, nickel alloys, copper alloys. Best D/C arc starts and stability, low erosion rate, wide amperage range, no spitting.

2% CERIATED (GRAY) FORMERLY ORANGE EWCe-2/WC20
Principal Oxide: 1.8–2.2% Cerium Oxide

Non-Radioactive. Best for use in Alternating Current (A/C) or Direct Current (D/C) applications using inverter or transformer based constant current power sources. Good for low-alloyed steels, non corroding steels, aluminum alloys, magnesium alloys, titanium alloys, nickel alloys, copper alloys. Good ignition and re-ignition properties, long service life, excellent arc stability. Low erosion rate, best at low amperage range, no spitting, good D/C arc starts and stability.

PURE (GREEN) EWP/WP
Principal Oxide: None

NON-RADIOACTIVE. Good for use in Alternating Current (A/C) for aluminum alloys and magnesium alloys in low to medium amperage applications using transformer based constant current power sources only. Balls easy, tends to spit at higher amperages. Used for non-critical welds only.

2% LANTHANATED (BLUE) EWLa-2/WL20
Principal Oxide: 1.8–2.2% Lanthanum Oxide

Non-Radioactive. Best general purpose electrode for both Alternating Current (A/C) or Direct Current (D/C) using inverter or transformer based constant current power sources. Good for low-alloyed steels, non corroding steels, aluminum alloys, magnesium alloys, titanium alloys, nickel alloys, copper alloys. Good arc starts and stability, medium to high amperage range, low erosion rate.

LaYZr™ (CHARTREUSE) EWG
Principal Oxides: 1.5% Lanthanum, 0.8% Yttrium Oxides, 0.8% Zirconium

Non-Radioactive. Best for automated or robotic applications in Alternating Current (A/C) or Direct Current (D/C) due to low voltage tolerance (changes in tip to work piece distance) using inverter or transformer based constant current power sources. Good for low-alloyed steels, non corroding steels, aluminum alloys, magnesium alloys, titanium alloys, nickel alloys, copper alloys. Very stable tip geometry, runs cooler than 2% Thoriated with longer life, low to medium amperage range. Very best low amperage starts

BACK TO TOP