Pre-Order Status
Blade-Loc is a revolutionary blade changing tool that provides safer changes for you and your table saw blades. Most people don't realize that using a piece of scrap wood can bend the blade, enough to leave scratch marks and tear-out in delicate panels. Blade-Loc evenly grips the blade around its perimeter and will not bend it. Moreover, Blade-Loc protects your hands. There is simply no better way to change your blades. Made from a specially formulated polymer, Blade-Loc is guaranteed to last a lifetime.

Features:

• Protect your hands from serious injury
• No more chipped or bent blades
• Will not harm your saw blade
• Fits all 10" blades
• Replaces the scrap wood and double wrench methods of blade changing

Pre-Order Status
If you've ever struggled to make a lengthy angled cut, this is the jig for you!

With a simple indexed angle setting system, heavy duty hold-down clamps and a smooth sliding design, it makes tapered cuts fast, easy and more precise. Perfect for chair legs, table legs and more. Jig fits snug in any standard 3/8" x 3/4" miter slot and features a large, ergonomic handle for smooth push-action performance throughout the cut. Plus, with the miter bar removed it doubles as a stable straight line ripping jig. This jig works with table saws on which the left edge of the right miter slot is 3-3/4” to 4-3/8” from the blade or 5” to 5-5/8” from the blade.

Features:

• Includes 36" miter bar
• Indexing marks make angle setting easy — each mark represents 1° of taper
• Dual tape measures provide convenient reference and also help set angles
• Two wide-body hold down clamps prevent stock from drifting dangerously from your fence
• Clamps have non-marring rubber caps for enhanced grip
• Three adhesive strips run across the jig to help stabilize your workpiece
• With taper angle zeroed out, jig works great to rip straight edges on rough lumber

An error of only a fraction of a degree can amount to ugly gaps in your corners when building boxes and frames. Rockler's Precision Miter Gauge solves the problem with accurately machined positive stops at the most commonly used locations, plus a miter bar with adjustable nylon set screws so it fits your slot to a T, while retaining silky smooth sliding. You'll enjoy all the essential features of a good solid miter gauge—accuracy, solidity and ease-of-use—in an affordable package. It's a no-nonsense, everyday-use tool that cuts corners in all the right ways.

Features:

• Make straight and mitered crosscuts with greater ease and precision
• Aluminum head features easy-to-read scale ranging from 0° to 70° in both directions
• Precision-machined positive stops at 0°, 15°, 22.5°, 30°, 45° and 60°
• Spring-loaded stop with low-profile knob locks into angle detents
• Machined hairline indicator makes it easy to accurately set angles that fall between detents
• 18'' rigid steel miter bar works in 3/8'' x 3/4'' miter slots (both T-slot and standard) and features adjustable nylon set screws for eliminating slop
• 1/2'' hole at end of miter bar and positive stop at 88° allow compact hanging storage
• Easy-to-Grip rubber overmold on all knobs for comfort
• Includes two 1'' knobs and two 5/16-18 x 1'' T-bolts for tool-free mounting of a shop-made fence

Pre-Order Status
Blade-Loc is a revolutionary blade changing tool that provides safer changes for you and your table saw blades. Most people don't realize that using a piece of scrap wood can bend the blade, enough to leave scratch marks and tear-out in delicate panels. Blade-Loc evenly grips the blade around its perimeter and will not bend it. Moreover, Blade-Loc protects your hands. There is simply no better way to change your blades. Made from a specially formulated polymer, Blade-Loc is guaranteed to last a lifetime.

Features:

• Protect your hands from serious injury
• No more chipped or bent blades
• Will not harm your saw blade
• Fits all 10" blades
• Replaces the scrap wood and double wrench methods of blade changing

The FeatherPRO Featherboard features EVA feathers which have revolutionized Featherboard performance and safety.   EVA is a High Density closed cell material that is exceptionally durable and offers benefits you cannot get with plastic or wooden feathers. These benefits include excellent feed control for the cleanest cut, unmatched kickback resistance that is more than 5x any plastic featherboard, and protection against damage to cutting blades or soft woods. Ideal for Table Saws, Routers, Fences.

• UNMATCHED SAFETY:  Patented hinge feather design absorbs kickback and provides 5x greater resistance against kickback versus plastic or wood feathers.
• REVOLUTIONARY FEED CONTROL:   Thicker EVA feathers increase the amount of surface contact on the work piece, ensuring a smoother glide and superior infeed control.
• VIBRATION DAMPENING:   EVA Feathers absorb vibration and minimize chatter for a cleaner cut.  Feathers are non-marring. EVA Feathers will not harm carbide blades or router bits if accidental contact.
• VERSATILE – Feathers are reversible, replaceable, and interchangeable. For greater sensitivity feedback, try our UltraFLEX Feather.
• SPECIFICATION:  Features Anchor Pro Hardware: mounts to a 3/8*3/4” (to 20mm) Miter Slot, or a 12-19mm T-Track.  Hardware Includes a single ¾” miter bar that secures in Miter Slot faster, with less effort and greater hold force. Miter bar has integrated T Bolt and a greater expansion range that covers variations in slot size.  Oversized ergonomic knobs.  Two 5/16-18 x 1-1/2” Fully Threaded T Bolts; Head Dim: .090 Thick x .45W x .725L.

Eliminate the danger of pushing narrow strips between the saw and fence!

This jig allows you to rip thin strips on the left side of the blade, eliminating the danger of pushing narrow strips between the saw and fence. Since the strip is not trapped between the blade and fence, there is also less risk of binding and kickback. It's simple to use; a single knob locks the jig into the miter track and locks your setting at the same time. Ball bearing guide keeps your workpiece firmly against the fence for perfect repeatability. Use the graduated scale to fine-tune for extremely thin strips.

Features:

• The perfect tool for edging, inlay, bent laminations and more
• Solid phenolic for durability
• Low-profile miter track clamp locks in at any point along the miter track
• Also works great on the bandsaw as a single-point fence for cutting curved slats in multiples
• Adjusts from 1-3/8" away from your miter track to 5-11/16" away from your miter track, enough for the thinnest rips
• Measures 5-1/4"W x 8"L
• The jig is stationary, while the fence is moved for each cut
• Fits 3/4" W x 3/8" D Miter Tracks