Included
Shaper Origin with Shaper SM-1 Spindle
Tanos Systainer
Two rolls of ShaperTape (45.7m each)
Tool change accessories
USB flash drive
¼-inch (6.35mm) upcut spiral cutter
â…›-inch (3.175mm) upcut spiral cutter
60° engraving cutter
Universal dust collection adapter

Warranty & Support
One-year warranty
Highly responsive email support

Workstation is our ultimate workspace and fixturing solution for your benchtop cutting operations. It’s designed to streamline and expand upon Origin’s abilities, offering rapid, repeatable and precise fixturing of a wide range of stock configurations.

Workstation features a reusable tape field, easily adjustable shelf for small or difficult-to-fixture workpieces, and intuitive indexing pins for alignment and registration. This greatly reduces setup time and makes it easier than ever to get cutting straight out of the box.

Buy Workstation with Origin and save $100. 

Included:
Body
Clamping Face
Support Bar
Support Arms
Shelf
Angle Fence
4mm Wrench
Hold Down Clamp x 2
Spoilboard x 4

Technical information:
Max. Height: 250mm, 9.8 in
Depth: 465mm, 18.3 in
Width: 515mm, 20.3 in
Assembled Weight: 9.75kg, 21.5 lbs

Pre-Order - An order placed today has an estimated delivery date of October (subject to change).

Origin utilizes ShaperTape fiducial markers to digitally augment your Workspace and accurately track position while you are working. ShaperTape’s uniquely encoded patterns are printed using specialized production equipment designed to ensure extremely high dimensional accuracy which results in optimum tool performance. ShaperTape is also specifically engineered to be easy to apply and remove, with carefully selected adhesives that won’t leave residue on your material. 

Each roll of ST1-150 ShaperTape is 150-feet in length. The amount of tape required for operation is proportional to the scale of project you're working on. For reference, 150-feet provides ample coverage for approximately one and a half standard 4' x 8' sheets of plywood.

The 1/8" Up-Spiral bit is perfect for cutting finer details. Made from carbide, known for maintaining a sharp cutting edge for a long time.

Detailed Specs:

• Material: Solid Carbide
• Overall Length: 2.0”
• Shank Diameter: 0.25”
• Cutter Diameter: 0.125”
• Cutter Length: 0.50”
• End Type: Upcu

This is our most commonly used cutter for working with any wood type, be it ply or hardwood, at 1/4" cutter diameter it is able to cut 1/4" deep per pass up to a maximum depth of 3/4". Two cutting flutes enable the cutter to be moved rapidly through large panels. Made from carbide, known for maintaining a sharp cutting edge for a long time.

Detailed Specs: 

• Material: Solid Carbide
• Overall Length: 2.5”
• Shank Diameter: 0.25”
• Cutter Diameter: 0.25”
• Cutter Length: 0.75”
• End Type: Upcut

The engraving bit allows for cutting fine lines in a range of materials.  

Detailed Specs:

• Material: Solid Carbide
• Overall Length: 1.5”
• Shank Diameter: 0.25”
• Cut Diameter: 0.25”
• Cut Length: 0.25”
• Cut Angle: 60Ëš
• End Type: V-Bit, Engraving

This Origin-ready ⅛-inch collet greatly increases the variety and intricacy of projects you can tackle with Origin, including inlays, fretwork and engraving.  Additionally, this collet will give you access to a range of specialty bits with 1/8” shanks, opening up new horizons in material.

• Shaper SC1-1250
• Compatible with Shaper SM1 Spindle
• Accepts ⅛”-shank cutters
• Made in USA

* cutter and penny shown for scale; not included with collet