Now you can easily create perfect circles, ellipses and sweeping arcs!

The Rockler Ellipse/Circle Router Jig lets you cut circles and ellipse shapes over a wide range of dimensions and proportions. With your router and this handy, easy-to-use jig, you'll be able to make picture frames, mirrors, signs, tabletops and more in just a matter of minutes. Compare to other ellipse/circle router jigs that cost CAD 141.93 more. Set up takes only a couple of minutes and is virtually math-free. Using the jig is just as easy. As you move the router through the cut, the jig's sliding dovetail mechanism keeps the router precisely on the cut line. Designed for use with just about any plunge router.

Features:

• Includes jig arm, jig base, two dovetail keys, and two locking pivots
• Single pivot can be locked to make circles up to 52" diameter
• Pre-drilled for Makita 1100; Milwaukee 5615-5624; DeWalt 616-618; Bosch MRC23 Series, 1617-1618; Ridgid 2930 Combo Kit; Hitachi M12VC (fixed and kit); Porter Cable 690 series, 890 series, 7529, 97529 and 8529 routers or routers with 6" base footprints

Make strong, tight-fitting box joints on your router table—great for small- to medium-sized boxes!

Box joints are strong and attractive, and with the help of our Router Table Box Joint Jig, they're also straightforward to make. This jig uses precision-machined solid brass indexing keys to ensure uniform finger spacing and an airtight fit. Keys are included for three finger widths: 1/4'', 3/8'' and 1/2'', and can be used with stock up to 3/4'' thick. The smooth-sliding sled features long ''skis'' that keep it square to the bit and tabs on the bottom that stop the sled at the end of the cut. Lock it into the miter slot of your table with our comfortable Easy-to-Grip knobs and you're ready to rout.

Features:

• Solid brass indexing keys ensure uniform spacing and tight finger joints
• Indexing keys store neatly in slots behind the sled
• Comfortable ergonomic knobs lock platform into 3/4'' miter slot
• Sled is made of durable glass-filled nylon, slides smoothly and provides ample support
• Sacrificial MDF fence face helps control tearout
• Dimensionally stable MDF platform has low-friction melamine coating for easy sliding and durability

Notice: Requires a straight router bit (sold separately) to match the size of the indexing key. Up-cut spiral bits deliver the cleanest cuts and help prevent blowout.

Product Description

Enjoy safety, comfort and confidence as you rout your smallest parts.

The Rockler Small Piece Holder keeps your fingers out of harm's way and securely holds your smallest workpieces while you machine them at the router table. In essence, it turns a small part into a larger part equipped with nice, comfortable handles. It's ideal for the short rail ends on very narrow doors and for small projects like toys, plaques and birdhouses. A variety of scrap blocks can be mounted to the clamp faces for thicker stock, special holding requirements, or to simply control end grain blowout. The quick-release clamp screw lets you slide the holder open and shut in an instant for quick operation. Large, comfortable handles ensure precision and control.

Features:

• Quick-release screw lets you quickly slide the jaws open and shut
• Two adjustable pins hold the workpiece firmly against the table
• Sacrificial pieces (not included) can be attached to the clamp faces to prevent blowout
• Large handles for comfort and control
• Knurled aluminum knob is tightened for a solid hold
• Abrasive clamp faces prevent material from slipping

Product Description

Use these templates with a flush-trim bit to rout smooth, consistent corner curves in radiuses ranging from 1/8'' all the way up to 2''.

Cutting a smooth radius to soften a 90° corner is fast and flawless with our Corner Radius Routing Templates. The templates can be used alone to draft a simple pencil line, or, better yet, you can click them onto the included handle and rout the radius on your router table with no need for pencil lines at all. The bottom of each template has grippy rubber strips, which, combined with the handle, provide a solid grip that firmly straddles the corner of your workpiece. You get a wide range of a dozen total radiuses: 1/8'' through 1'' radiuses, in 1/8'' increments, and 1-1/4'' through 2'' radiuses, in 1/4'' increments. They're the perfect solution for any project with quarter-round corners, such as the armrests on Adirondack chairs, bookcase end panels, table tops, wall-mounted shelves and more.

Features:

• Templates click easily in and out of the included handle
• Rubber strips help grip the workpiece
• Radius is printed on each rounded corner for easy selection
• ''Feed Direction'' and ''Hold Here'' are molded into the handle for ease of use
• Designed for use with a router table and a flush trim bit with a tip-mounted bearing (sold separately)

Product Description

Now you can use your compact plunge router to create fast, accurate ellipses, circles and sweeping arcs no math or advanced drafting skills required!

Woodworkers who tend toward smaller projects will love our Rockler Compact Router Ellipse and Circle Jig. It features all of the easy smooth-sliding functionality of its bigger brother (#27712, sold separately), but is used with a lightweight, easy-to-maneuver compact plunge router. Ideal for cutting out the shape of small signs, tabletops and frames, it can cut ellipses from as small as 6'' x 11'' to as large as 19'' x 24'', and circles from 6'' to 24'' in diameter. Set up takes only a couple of minutes and using the jig is just as easy. As you move the router through the cut, the jig's sliding dovetail mechanism keeps the router precisely on the cut line.

Features:

• Made from durable, smooth-sliding phenolic
• Fits Porter-Cable, Dewalt and Bosch Compact Plunge Routers (#41770 and #41462, sold separately)
• Setup is easy following the setup diagrams printed directly on the jig
• Sliding dovetail ways ensure accuracy and ease-of-use

Product Description

Smooth-running sled ensures perfectly square coped rail ends with virtually zero tear-out.

If you're building cope-and-stick doors and drawer fronts, our new Rail Coping Sled will be an indispensable helpmate. With its smooth-sliding phenolic base, and sturdy toggle clamp holding your stock firmly against the fence, your rails will travel unwaveringly past the cutter for the cleanest, squarest cuts you can imagine. Particularly with drawer fronts, which sometimes use very narrow rails, the sled prevents parts from dipping in too deep and keeps your hands safely out of harm's way. A sacrificial block can be attached to the fence to prevent end grain blowout, while an abrasive strip prevents the workpiece from wandering. Unlike many jigs that use the miter slot, our sled uses only the fence as a reference, so there is no need to waste time aligning the miter slot parallel with the fence. In addition, the coping sled has been redesigned so that the reference edge is a separate clear guide rail elevated 2'' above the table, meaning there is no risk of cutting into the sled.

Features:

• New, taller round handles allow a firm, comfortable grip from any angle of approach
• Smooth-sliding 3/8'' thick phenolic base stays rigid and flat when toggle clamp pressure is applied
• Toggle clamp features easy, tool-free adjustments and one-handed operation
• Clear, elevated guide runs against fence, offering a large, smooth-running reference edge without having to cut into the sled
• Clear guide runs 2'' above the table, so it works with most router table fences on the market (all Rockler and Bench Dog fences)
• Sacrificial block is easily replaceable to accommodate different profiles
• Maximum workpiece dimension is 5'' wide x 1-1/4'' thick