No Products in the Cart
The Rout-R-Lift II has all the same great features as our Mast-R-Lift II but at a price we know you will appreciate. This lift is made out of aluminum with a phenolic top plate. The Rout-R-Lift II comes in 5 different styles depending on the router and router diameter you plan to use. Please verify which router you plan to use before purchasing one of these lifts.
We wanted our Rout-R-Lift II to be as smooth as our new Mast-R-Lift II while raising and lowering your lift. To achieve this, we decided to add a double sealed bearing to the spindle. This provides a lifetime of use and a Lift so smooth you can raise and lower your motor with one finger.
The shafts on the Rout-R-Lift II, like all our Router Lifts, are pressed into a shaft mount with hydraulic pressure. We do not just thread our shafts to the top plate. The owner of JessEm spent many years as a Tool and Die maker before founding our company, and cutting corners was not an option. By pressing the shafts into a larger diameter mount we are able to attach the shafts to the top plate and fasten in place with more than one screw spreading the lateral load and providing a very rigid and durable mount that will withstand the toughest routing operations.
Like our current Mast-R-Lift II, bit changes above the table was a must for all routers that work with this lift without the need for bent wrenches.
All the machined components on the Rout-R-Lift II are machined on one of our CNC mills here in our Oro-Medonte, Ontario, Canada location.
02310 Rout-R-Lift II For Use With PC 690/890, DW 610/616/618, BOSCH 1617/1618 and Any other 3.5" Motor Diameter
02311 Rout-R-Lift II For Use With MAKITA 1101 (3.218" Motor Dia.)
02312 Rout-R-Lift II For Use With HITACHI M12VC-KM2VC (3.267" Motor Dia.)
02313 Rout-R-Lift II For Use With MILWAUKEE 5615/5616/5619 (3.32" Motor Dia.)
02314 Rout-R-Lift II For Use With RIGID 29302 (3.625" Motor Dia.)