{"product_id":"oneway-1640-wood-lathe-1-5hp-and-2hp-models","title":"Oneway 1640 Wood Lathe | 1.5HP and 2HP Models","description":"\u003cp\u003eHeadstock Features\u003c\/p\u003e\n\u003cp\u003e- Spindle Safety Groove\u003c\/p\u003e\n\u003cp\u003e- #2 Morse Taper\u003c\/p\u003e\n\u003cp\u003e- Extended Spindle Nose\u003c\/p\u003e\n\u003cp\u003e- Spindle Thread M33 x 3.5 RH Inboard \u0026amp; Outboard\u003c\/p\u003e\n\u003cp\u003e- 48 Position Indexing and Spindle Lock\u003c\/p\u003e\n\u003cp\u003e- 2 Duplex Bearing Spindle Design\u003c\/p\u003e\n\u003cp\u003e- Cartridge Mount Spindle\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eControl Features\u003c\/p\u003e\n\u003cp\u003e- Start \/ Stop Button\u003c\/p\u003e\n\u003cp\u003e- Emergency Stop\u003c\/p\u003e\n\u003cp\u003e- Speed Pot (variable speed)\u003c\/p\u003e\n\u003cp\u003e- Twist Select Forward \/ Reverse\u003c\/p\u003e\n\u003cp\u003e- Long \/ Short Acceleration Toggle Switch\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eTailstock Features\u003c\/p\u003e\n\u003cp\u003e- Handled for easy removal\u003c\/p\u003e\n\u003cp\u003e- #3 Morse Taper\u003c\/p\u003e\n\u003cp\u003e- 4” Quill Travel\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eToolrest \/ Banjo Features\u003c\/p\u003e\n\u003cp\u003e- Patented Clamping Mechanism\u003c\/p\u003e\n\u003cp\u003e- 14” Toolrest included\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eBed Features\u003c\/p\u003e\n\u003cp\u003e- Tubular bed design achieves almost perfect torsional rigidity\u003c\/p\u003e\n\u003cp\u003e- Offset Bed for easy clean up\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eGENERAL DIMENSIONS\u003c\/p\u003e\n\u003cp\u003e- Spindle Height: 42” - 46” (variable)\u003c\/p\u003e\n\u003cp\u003e- Power Input: 220V, Single Phase\u003c\/p\u003e\n\u003cp\u003e- Length x Width: 60” x 31¼”\u003c\/p\u003e\n\u003cp\u003e- Weight: Approximately 700 lbs.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eManufactured to the same high standards as its larger counterpart (the 2436), the 1640 offers the following features:\u003c\/p\u003e\n\u003cp\u003e- 16” swing over the bed (12½” swing over Banjo)\u003c\/p\u003e\n\u003cp\u003e- 40” between centers\u003c\/p\u003e\n\u003cp\u003e- Spindle is hardened and ground\u003c\/p\u003e\n\u003cp\u003e- Solid cast iron headstock and tailstock\u003c\/p\u003e\n\u003cp\u003e- M33 x 3.5” RH spindle thread (inboard \u0026amp; outboard)\u003c\/p\u003e\n\u003cp\u003e- 5\/8” thru hole (in spindle)\u003c\/p\u003e\n\u003cp\u003e- Indexing: 48 positions (7½ degree)\u003c\/p\u003e\n\u003cp\u003e- Spindle locking mechanism (8 position)\u003c\/p\u003e\n\u003cp\u003e- 2 step pulley (14 - 700 \/ 51 - 2585)\u003c\/p\u003e\n\u003cp\u003e- Spindle: #2 Morse Taper\u003c\/p\u003e\n\u003cp\u003e- Tailstock: #3 Morse Taper\u003c\/p\u003e\n\u003cp\u003e- Forward \u0026amp; Reverse with two pre-programmed accel \/ decel settings\u003c\/p\u003e\n\u003cp\u003e- 220V input, 1½ or 2 HP AC variable speed inverter (drive) with dynamic braking\u003c\/p\u003e\n\u003cp\u003e- Constant torque motor\u003c\/p\u003e\n\u003cp\u003e- 14” Toolrest with 1” post\u003c\/p\u003e\n\u003cp\u003e- Variable position controller\u003c\/p\u003e\n\u003cp\u003e- High performance powder paint\u003c\/p\u003e\n\u003cp\u003e- Cast iron tailstock with Acme thread \u0026amp; 4” quill travel\u003c\/p\u003e\n\u003cp\u003e- Patented clamping mechanism in banjo (Toolrest Base)\u003c\/p\u003e\n\u003cp\u003e- Offset bed for easy clean up\u003c\/p\u003e\n\u003cp\u003e- Adjustable legs with 4” travel (effectively allows variable spindle height of 42” - 46”)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePackage Includes\u003c\/p\u003e\n\u003cp\u003e- #2 MT Safe Driver\u003c\/p\u003e\n\u003cp\u003e- #3 MT Live Center (with cones)\u003c\/p\u003e\n\u003cp\u003e- Knock-out Rod\u003c\/p\u003e\n\u003cp\u003e- 4” Faceplate (Powder Painted)\u003c\/p\u003e\n\u003cp\u003e- 14” Toolrest\u003c\/p\u003e\n\u003cp\u003e- Leveling Pad\u003c\/p\u003e\n\u003cp\u003e- 4mm, 6mm and 8mm Allen Keys\u003c\/p\u003e","brand":"ONEWAY","offers":[{"title":"1.5HP","offer_id":43036411035696,"sku":"ONE1640-1.5","price":4887.5,"currency_code":"CAD","in_stock":false},{"title":"2HP","offer_id":43036411068464,"sku":"ONE1640-2","price":5186.5,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/files\/Oneway-1640-Wood-Lathe-1-5HP-and-2HP-Models-120.jpg?v=1778703078","url":"https:\/\/greatwesternsaw.com\/products\/oneway-1640-wood-lathe-1-5hp-and-2hp-models","provider":"Great Western Saw ","version":"1.0","type":"link"}