Rockler Hold Down Clamp
35283Regular price $18.19
Outfit your workbenches, jigs, or machine tables with the ultimate t-track accessory!
These Hold Down Clamps feature non-marring rubber tips that are ideal for working with soft woods, pre-finished panels, or anything that's already been prep sanded. The rubber clamp faces also help to grip the workpiece for better safety and accuracy. In addition, they have a wide aluminum body, allowing for maximum tension. Clamps include a 5-star knob and a 5/16" T-bolt designed to fit into T-tracks on drill presses, router tables and more. The Hold Down Clamp, 5-1/2"L x 3/4"W provides the same great features as the 5-1/2"L x 1-1/8"W version, but in a slimmer width and without the non-marring rubber tips.
36" Multi Track for Jigs and Custom Fences-Multi Track
35605Regular price $40.49
With Universal T-Tracks on every face, these 36" tracks are full of potential - use them to create custom fences, jigs and fixtures. Once assembled, the multiple tracks give you countless options for attaching stops, hold-downs, sub-fences and more. Available in 2-1/4" and 3" heights. Multi Track Brackets and Flip Stops sold separately.
Rockler T-Track Corner Stop
58673Regular price $47.24
Right angle stop cradles the corner of your workpiece to keep it securely in position.
The Rockler Corner Stop has all the benefits of our other T-track stops, but with a right angle shape that securely straddles the corner of your workpiece. Since it provides a 90Â° reference, the stop is ideal for pocket hole face frame assembly. It pivots and locks into detents at 0Â° and 180Â° for either a right- or left-handed corner. A round recess at the inside corner provides bit clearance when zeroing your CNC, and prevents sawdust and debris from gathering in the corner. The stop works seamlessly with the other T-track stops in our lineup. The distance from the T-track to the edge of the fence is the same on the Corner Stop as it is on the Long Stop (#53845, sold separately), making alignment effortless. Like our other Rockler T-track stops, the low-profile knobs fold flat for clearance when belt sanding, hand planning, scraping dried glue and CNC routing.
Rockler Auto-Lock T-Track Hold Down Clamp
54280Regular price $41.99
Automatically adjusts for thicknesses from 0'' to 2-3/4'' securing your work is as fast and easy as flipping a switch!
Tightening Rockler's new Auto-Lock T-Track Hold Down Clamp is literally an open-and-shut case just press down the lever to secure anything from veneer sheets to lumber up to 2-3/4'' thick! Once set, the clamping pressure is always the same regardless of workpiece size, and is adjusted only if needed with the set screw. The clamp pivots 360Â°, allowing you to clamp near the workpiece edge to minimize obstructions. A large knurled wheel locks the clamp securely to the T-track. The toggle foot is adjusted with the knurled aluminum knob for best placement no wrenches required while the clamping foot pivots on a ball joint so it can adapt to any angle and is rubber coated to prevent marring. Simply lift the lever to release.
Rockler Long Stop for Rockler T-Track System
53845Regular price $27.99
5'' length works perfectly in pairs for face frame assembly, or alone for belt sanding or scraping.
Combined with your T-Track Table, these stops give you a fast, accurate work holding solution for a wide variety of applications. The stops feature low-profile knobs that fold flat for easy clearance when belt sanding, hand planning, or scraping dried glue. Long Stops are also ideally suited for pocket hole face frame assembly. Use two Long Stops to create a square corner to support your face frame parts while drilling. The increased length of the Long Stop spans the joint line, allowing you to easily flush up rails and stiles by butting them against the stop. This is also handy when assembling cope and stick doors. The keyway on the bottom of the Long Stop runs parallel to the stop face. Two other stop styles are available separately: Short (#50603) and Inline (#54161) with keyway perpendicular to stop face.
Rockler T-Track Inline Cam Clamp
52145Regular price $33.74
Just slide this mini cam clamp into your T-track and pull the lever to secure your work in position.
When paired with a T-track table and one or more of our optional T-Track Stops (#50603, sold separately), this little cam clamp provides just enough pressure to keep your work in place as you machine the unobstructed surface. Thanks to the low profile clamp face (only 5/8'' high), you can easily sand without hitting the clamp. The strip of rubber on the clamp face helps to reduce the chance of marring or slippage. The bottom is also faced with rubber, and features an inline keyed slot that locks into the T-track for further stability. Use with any T-track that accepts 5/16'' T-bolts, including our optional T-Track Table and many CNC tables.
Rockler Short Stop for Rockler T-Track System
50603Regular price $13.49
Pair these stops with our T-Track Table for a fast, accurate work holding solution!
Combined with your T-Track Table, these stops give you a fast, accurate work holding solution for a wide variety of applications. The stops feature low-profile knobs that fold flat for easy clearance when sanding or machining. Short Stops can be used on one end of the board to hold your work while belt sanding, hand planning, or scraping dried glue off of a panel. The keyway on the bottom of the Short Stop runs parallel to the stop face. Two other stop styles are available separately: Inline (#54161) with keyway perpendicular to stop face, and Long (#53845) keyway parallel to stop face.
Rockler T-Track Flex-Hold Arm
50581Regular price $53.99
Holds dust hoses, pneumatic blowers and shop lights in any orientation, at any point along a standard T-track.
At one point or another, we've all wished we had a third hand around the shop to help hold things when the two we already have are occupied. The T-Track Flex-Hold Arm from Rockler does just that, allowing you to hold and precisely position objects at any point along a length of standard T-track. Use it to attach dust collection hoses, pneumatic blowers for clearing surface dust, work lights and more. With the T-track base, you're free to secure the 18'' snake arm directly in the middle of the table, a capability you don't get with a typical clamp-style base. Use it with our T-track table (#46654), in the accessory track of our router tables, or in the accessory track of our router table fences. With flexibility and articulation like this, the applications are virtually limitless.
Rockler Mini Deluxe Hold-Down Clamp
45692Regular price $11.19
At only 3-1/2'' long, this compact version of our popular Deluxe Hold-Down Clamp is ideal for smaller work surfaces, such as benchtop router tables and shop-made jigs. Non-marring rubber tips are ideal for working with soft woods, pre-finished panels, or anything that's already been prep sanded. Hold-down includes a 4-star knob, washer and a 5/16" x 3" T-bolt designed to fit into T-tracks on drill presses, router tables and more.
Rockler 129-pc Jig Hardware Kit 5/16"-18
38160Regular price $107.99
All the essential hardware for building or repairing customer jigs.
With all the essential hardware for building or repairing custom jigs, this kit will be a fixture in your shop for years to come. T-bolts will fit all Rockler Universal T-Tracks (#22104, #26420, #20054, sold separately). Bottom plates on 5/16"-18 T-bolts measure 9/16" W x 7/8" L x 7/64" H.
Multi Track Brackets 2"
35961Regular price $33.74
Multi Track Brackets 1.25"
33338Regular price $33.74
Rockler Jig Parts Hardware Kit
26424Regular price $48.99
Build your own jigs with our JIG IT hardware value pack. Assorted T-bolts, knobs, and inserts for customizing your own jigs and fixtures for your shop.
(4) 5 Star Knob 5/16" - 18tpi thru
(4) 5 Star Knob 5/16" - 18tpi stud
(4) 2" T-Knob 5/16" - 18tpi thru
(1) Pack of Tee-Nuts 5/16" - 18tpi (8 per pack)
(1) Pack of 5/16" - 18tpi Threaded Insert (8 per pack)
(6) 5/16" x 1" T-Bolt
(6) 5/16" x 1-1/2" T-bolt
(6) 5/16" x 2-1/2" T-Bolt
Rockler T-Track Intersection Kit
22209Regular price $33.74
Allows jigs and fixtures to slide in almost any direction.
Slide your jigs and fixtures in almost any direction!