{"title":"Rockler","description":"\u003cp\u003e\u003cspan data-olk-copy-source=\"MessageBody\"\u003eWe offer the full range of Rockler products available to the Canadian market. Items not listed below are available only in the U.S.\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"rockler-t-track-intersection-kit","title":"Rockler 22209 - T-Track Intersection Kit","description":"\u003cp\u003eAllows jigs and fixtures to slide in almost any direction.\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eUsed with our 3\/4\" wide aluminum T-track, this 4-piece kit allows you to make the T-track intersection you need\u003c\/li\u003e\n\u003cli\u003eIncludes four pieces and mounting hardware - enough to make one intersection\u003c\/li\u003e\n\u003cli\u003eStop blocks and hold-downs can be used almost anywhere on your table\u003c\/li\u003e\n\u003cli\u003eEach aluminum piece is 3\" long and is cut at 90deg\u003c\/li\u003e\n\u003cli\u003ePre-drilled and countersunk with two holes to stay level when matching with other track pieces\u003c\/li\u003e\n\u003cli\u003eIncludes #6 x 5\/8\" screws\u003c\/li\u003e\n\u003cli\u003eAluminum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003ctable class=\"data table additional-attributes\" id=\"product-attribute-specs-table\" style=\"width: 99.915%;\"\u003e\n\u003ccaption class=\"table-caption\"\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth class=\"col label\" scope=\"row\" style=\"text-align: left; width: 46.8964%;\"\u003eBrand\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Brand\" style=\"width: 52.8264%;\"\u003eRockler\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col label\" scope=\"row\" style=\"text-align: left; width: 46.8964%;\"\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Manufacturer Part Number\" style=\"width: 52.8264%;\"\u003eTAU4JT-3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col label\" scope=\"row\" style=\"text-align: left; width: 46.8964%;\"\u003eWeight\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Weight\" style=\"width: 52.8264%;\"\u003e0.20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col label\" scope=\"row\" style=\"text-align: left; width: 46.8964%;\"\u003eUnit of Measure\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Unit of Measure\" style=\"width: 52.8264%;\"\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e(1) Rockler T-Track Intersection Kit\u003c\/span\u003e\u003c\/p\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31763043844144,"sku":"22209","price":42.87,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/files\/Rockler-22209-T-Track-Intersection-Kit-1.webp?v=1746825374"},{"product_id":"rockler-cove-cutting-table-saw-jig","title":"Rockler 22395 - Cove Cutting Table Saw Jig","description":"\u003cp\u003e\u003cspan\u003eProvides everything you need for safe, easy coving.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCut custom coves on your table saw without juggling all those fences and clamps! This jig includes everything you need for safe, easy coving in one easy-to-use package. Accepts stock up to 7\" wide and 1-1\/2\" thick, enabling you to cut huge crown moldings that would cost a fortune from the lumberyard. Try angling the blade for a truly unique shape. Ingenious clamping system secures the fences using the 3\/4\" miter slots on the saw table. Large, easy grip knobs make for quick, tool-free setups. Included featherboard kit holds stock firmly to the table for added safety, precision and repeatability.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eWhat's Included\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e(1) Rockler Cove Cutting Table Saw Jig\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/h5\u003e\n\u003ctable style=\"width: 99.915%; height: 49.2046px;\" id=\"product-attribute-specs-table\" class=\"data table additional-attributes\"\u003e\n\u003ccaption class=\"table-caption\"\u003e\u003c\/caption\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6023px;\"\u003e\n\u003cth style=\"width: 41.671%; height: 19.6023px; text-align: left;\" scope=\"row\" class=\"col label\"\u003eBrand\u003c\/th\u003e\n\u003ctd style=\"width: 58.0519%; height: 19.6023px;\" data-th=\"Brand\" class=\"col data\"\u003eRockler\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 10px;\"\u003e\n\u003cth style=\"width: 41.671%; height: 10px; text-align: left;\" scope=\"row\" class=\"col label\"\u003eWeight\u003c\/th\u003e\n\u003ctd style=\"width: 58.0519%; height: 10px;\" data-th=\"Weight\" class=\"col data\"\u003e8.90\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6023px;\"\u003e\n\u003cth style=\"width: 41.671%; height: 19.6023px; text-align: left;\" scope=\"row\" class=\"col label\"\u003eUnit of Measure\u003c\/th\u003e\n\u003ctd style=\"width: 58.0519%; height: 19.6023px;\" data-th=\"Unit of Measure\" class=\"col data\"\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch5\u003e\u003cbr\u003e\u003c\/h5\u003e\n\u003ch6\u003eInstruction Manual\u003c\/h6\u003e\n\u003cdiv\u003e\u003ciframe style=\"width: 100%; height: 600px;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/files\/22395-cove-cutting-jig-inst.pdf?v=1746801979\u0026amp;embedded=true\"\u003e\n\u003c\/iframe\u003e\u003c\/div\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31763048759344,"sku":"22395","price":194.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/files\/Rockler-22395-Cove-Cutting-Table-Saw-Jig-2.jpg?v=1746907852"},{"product_id":"bench-dog-blade-loc","title":"Rockler 24210 - Bench Dog Blade-Loc","description":"\u003cp\u003e\u003cspan\u003eProtect your blade and your hand when changing blades\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBlade-Loc is a revolutionary blade changing tool that provides safer changes for you and your table saw blades. Most people don't realize that using a piece of scrap wood can bend the blade, enough to leave scratch marks and tear-out in delicate panels. Blade-Loc evenly grips the blade around its perimeter and will not bend it. Moreover, Blade-Loc protects your hands. There is simply no better way to change your blades. Made from a specially formulated polymer, Blade-Loc is guaranteed to last a lifetime.\u003c\/p\u003e\n\u003ch5\u003e\n\u003cbr\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eProtect your hands from serious injury\u003c\/li\u003e\n\u003cli\u003eNo more chipped or bent blades\u003c\/li\u003e\n\u003cli\u003eWill not harm your saw blade\u003c\/li\u003e\n\u003cli\u003eFits all 10\" blades\u003c\/li\u003e\n\u003cli\u003eReplaces the scrap wood and double wrench methods of blade changing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eWhat's Included\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e(1) Bench Dog Blade-Loc\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/h5\u003e\n\u003ctable class=\"data table additional-attributes\" id=\"product-attribute-specs-table\" style=\"width: 99.915%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth class=\"col label\" scope=\"row\" style=\"text-align: left; width: 51.5673%;\"\u003eBrand\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Brand\" style=\"width: 48.1555%;\"\u003eRockler Bench Dog\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col label\" scope=\"row\" style=\"text-align: left; width: 51.5673%;\"\u003eManufacturer Part Number\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Manufacturer Part Number\" style=\"width: 48.1555%;\"\u003e10-001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col label\" scope=\"row\" style=\"text-align: left; width: 51.5673%;\"\u003eWeight\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Weight\" style=\"width: 48.1555%;\"\u003e0.35\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth class=\"col label\" scope=\"row\" style=\"text-align: left; width: 51.5673%;\"\u003eUnit of Measure\u003c\/th\u003e\n\u003ctd class=\"col data\" data-th=\"Unit of Measure\" style=\"width: 48.1555%;\"\u003eEach\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31763050954800,"sku":"24210","price":23.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/files\/Rockler-24210-Bench-Dog-Blade-Loc-1.jpg?v=1761682362"},{"product_id":"rockler-jig-parts-hardware-kit","title":"Rockler Jig Parts Hardware Kit","description":"\u003cp\u003e\u003cstrong style=\"font-size: 1.4em;\"\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBuild your own jigs with our JIG IT hardware value pack. Assorted T-bolts, knobs, and inserts for customizing your own jigs and fixtures for your shop.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e(4) 5 Star Knob 5\/16\" - 18tpi thru\u003cbr\u003e(4) 5 Star Knob 5\/16\" - 18tpi stud\u003cbr\u003e(4) 2\" T-Knob 5\/16\" - 18tpi thru\u003cbr\u003e(1) Pack of Tee-Nuts 5\/16\" - 18tpi (8 per pack)\u003cbr\u003e(1) Pack of 5\/16\" - 18tpi Threaded Insert (8 per pack)\u003cbr\u003e(6) 5\/16\" x 1\" T-Bolt\u003cbr\u003e(6) 5\/16\" x 1-1\/2\" T-bolt\u003cbr\u003e(6) 5\/16\" x 2-1\/2\" T-Bolt\u003c\/span\u003e\u003c\/p\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31763070058544,"sku":"26424","price":77.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Rockler-Jig-Parts-Hardware-Kit-3.jpg?v=1746825364"},{"product_id":"rockler-blast-gate-bracket-4-pack","title":"Rockler Blast Gate Bracket 4-Pack","description":"\u003cp\u003eEasily attaches in seconds.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAnchoring blast gates to the wall is a quick way to add function and reduce slop in the shop; and with these handy brackets, it's never been simpler. They attach in seconds to any standard 4'' metal or plastic blast gate, and feature easily accessible screw holes for fast wall-mounting. You'll prevent your hose from moving every time you open the gate, and eliminate stress on the fragile connections that hold everything together.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31763072876592,"sku":"27066","price":31.17,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Rockler-Blast-Gate-Bracket-4-Pack-2.jpg?v=1746825362"},{"product_id":"rockler-ellipse-circle-router-jig","title":"Rockler Ellipse\/Circle Router Jig","description":"\u003cp\u003e\u003cspan\u003eNow you can easily create perfect circles, ellipses and sweeping arcs!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Rockler Ellipse\/Circle Router Jig lets you cut circles and ellipse shapes over a wide range of dimensions and proportions. With your router and this handy, easy-to-use jig, you'll be able to make picture frames, mirrors, signs, tabletops and more in just a matter of minutes. Set up takes only a couple of minutes and is virtually math-free. Using the jig is just as easy. As you move the router through the cut, the jig's sliding dovetail mechanism keeps the router precisely on the cut line. Designed for use with just about any plunge router.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes jig arm, jig base, two dovetail keys, and two locking pivots\u003c\/li\u003e\n\u003cli\u003eSingle pivot can be locked to make circles up to 52\" diameter\u003c\/li\u003e\n\u003cli\u003ePre-drilled for Makita 1100; Milwaukee 5615-5624; DeWalt 616-618; Bosch MRC23 Series, 1617-1618; Ridgid 2930 Combo Kit; Hitachi M12VC (fixed and kit); Porter Cable 690 series, 890 series, 7529, 97529 and 8529 routers or routers with 6\" base footprints\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31763076120624,"sku":"27712","price":214.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Rockler-Ellipse-Circle-Router-Jig-7.jpg?v=1746825361"},{"product_id":"rockler-2-1-4-fence-flip-stop","title":"Rockler 2-1\/4'' Fence Flip Stop","description":"\u003cp\u003e\u003cstrong style=\"font-size: 1.4em;\"\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIdeal for fences with top-mounted tracks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAttaches to standard and universal T-tracks on 2-1\/4\" fences with included 5\/16\" T-bolt and knob. Ideal for fences with top-mounted tracks. Set the stop at your desired measurement to create a square end for repeatable cuts and other tasks.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31763078053936,"sku":"31214","price":38.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Rockler-2-1-4-Fence-Flip-Stop-4.jpg?v=1746825360"},{"product_id":"x-treme-tape-for-dust-joints","title":"X-Treme Tape For Dust Joints","description":"\u003cp\u003e\u003cspan\u003eMakes air-tight seal without clamps.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eNo Clamps Needed! Attaches and seals dust hose! Sealing the joints in your dust collection system just got easier. X-Treme Tape stretches and bonds to itself to make an air-tight seal for plastic and metal dust joints, ducts, tool grips and more. Connect and seal dust joints and accessories without clamps. X-Treme Tape contains no adhesive and won't leave a sticky residue. Measures 1-1\/2\" wide.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemains flexible to -60F\u003c\/li\u003e\n\u003cli\u003eWon't melt up to 500F\u003c\/li\u003e\n\u003cli\u003eBond is complete after 24 hours at room temperature\u003c\/li\u003e\n\u003cli\u003eContains no adhesive and won't leave a sticky residue\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e(1) 20' Roll of X-Treme Tape for Dust Joints\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31763089981488,"sku":"32316","price":54.57,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/X-Treme-Tape-For-Dust-Joints-0.jpg?v=1746825358"},{"product_id":"multi-track-brackets-1-25","title":"Multi Track Brackets 125\"","description":"\u003cspan\u003eCombine your Multi Tracks with these extruded aluminum brackets to form L-shaped fences. Center slots accept T-bolts (not included) to connect Multi Tracks to any built-in T-Track. Includes two brackets, eight 1\/4\"-20 bolts, eight washers, and eight T-Track nuts to secure brackets to Multi Tracks (#35605, #34262, sold separately).\u003c\/span\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31763112230960,"sku":"33338","price":38.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Multi-Track-Brackets-125-8.jpg?v=1746825354"},{"product_id":"copy-of-multi-track-brackets-2","title":"Multi Track Brackets 2\"","description":"\u003cspan\u003eCombine your Multi Tracks with these extruded aluminum brackets to form L-shaped fences. Center slots accept T-bolts (not included) to connect Multi Tracks to any built-in T-Track. Includes two brackets, eight 1\/4\"-20 bolts, eight washers, and eight T-Track nuts to secure brackets to Multi Tracks (#35605, #34262, sold separately).\u003c\/span\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31763113246768,"sku":"35961","price":42.87,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Multi-Track-Brackets-2-2.jpg?v=1746825353"},{"product_id":"rockler-pipe-clamp-rack-bar-clamp-rack","title":"Rockler Pipe Clamp Rack\/Bar Clamp Rack","description":"\u003cp\u003e\u003cspan\u003eStore your pipes securely on the wall.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePut an end to that pile of pipe clamps leaned up in the corner! This new clamp rack from Rockler puts your pipes firmly on the wall or on the Pack Rack (#21834, sold separately) so you'll never have to hear your clamps clatter on the concrete again. The nine slots in the clamp rack are sized to accept pipe clamps, bar clamps and even aluminum bar clamps, so the choice is yours.\u003cbr\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHolds nine pipe clamps or bar clamps\u003c\/li\u003e\n\u003cli\u003ePre-drilled holes are 16\" on center for simple mounting to wall studs\u003c\/li\u003e\n\u003cli\u003eSlotted holes line up with those on the Pack Rack (#21834, sold separately)\u003c\/li\u003e\n\u003cli\u003eConstructed of sturdy galvanized steel for a lifetime of service\u003c\/li\u003e\n\u003cli\u003e24-5\/8\" overall length\u003c\/li\u003e\n\u003cli\u003eUse as a pipe clamp rack or as a bar clamp rack, the slots accept them all\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31763135627312,"sku":"33547","price":67.17,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/files\/Rockler-Pipe-Clamp-Rack-Bar-Clamp-Rack-3.jpg?v=1746825352"},{"product_id":"accuright-circle-jig-for-bandsaws","title":"AccuRight Circle Jig for Bandsaws","description":"\u003cspan\u003eCut perfect circles every time! Attach this jig to almost any bandsaw to create a system for repeatable accurate circle cuts. Circles up to 48\" in diameter are possible when you provide proper external support. Easy-to-read radius measurements ensure precise circle size. Use the included universal attachment bracket to quickly secure the jig and you'll be well on your way to making clock faces, coasters, toy wheels and more!\u003c\/span\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31763138478128,"sku":"33981","price":272.91,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/AccuRight-Circle-Jig-for-Bandsaws-0.jpg?v=1746825350"},{"product_id":"36-multi-track-for-jigs-and-custom-fences-multi-track","title":"36\" Multi Track For Jigs And Custom Fences-Multi Track","description":"\u003cp\u003eWith Universal T-Tracks on every face, these 36\" tracks are full of potential - use them to create custom fences, jigs and fixtures. Once assembled, the multiple tracks give you countless options for attaching stops, hold-downs, sub-fences and more. Available in 2-1\/4\" and 3\" heights. Multi Track Brackets and Flip Stops sold separately.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUniversal T-tracks accept all three major accessory fasteners: 1\/4\" T-bolts, 1\/4\" Hex Bolts and 5\/16\" T-bolts\u003c\/li\u003e\n\u003cli\u003eSolid extruded aluminum construction for strength and durability\u003c\/li\u003e\n\u003cli\u003eT-tracks are spaced 3\/4\" apart (on center) for simple assembly and optimal utility\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rockler Woodworking","offers":[{"title":"2 1\/4\"","offer_id":31763140870192,"sku":"35605","price":77.97,"currency_code":"CAD","in_stock":true},{"title":"3\"","offer_id":31763140902960,"sku":"34262","price":97.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/36-Multi-Track-For-Jigs-And-Custom-Fences-Multi-Tr-0.jpg?v=1746825349"},{"product_id":"rockler-f-style-clamp-rack","title":"Rockler F-Style Clamp Rack","description":"\u003cp\u003e\u003cspan\u003eAllows for easy and safe grouping of F-clamps.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eA compact solution to a sprawling problem! This new rack from Rockler herds your F-clamps together and mounts them firmly to the wall or to the Pack Rack (#21834, sold separately) so your clamps are where you need them when you need them.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePre-drilled holes are 16\" on center for simple mounting to wall studs\u003c\/li\u003e\n\u003cli\u003eSlotted holes line up with the Pack Rack\u003c\/li\u003e\n\u003cli\u003eConstructed of sturdy galvanized steel for a lifetime of service\u003c\/li\u003e\n\u003cli\u003e24-3\/8\" overall length\u003c\/li\u003e\n\u003cli\u003eSpacers between clamp storage slots measure 1.33\" wide. Clamp storage slots measure .30\" wide\u003c\/li\u003e\n\u003cli\u003eRack may not accept all F-Style Clamps\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31763148177456,"sku":"34302","price":67.17,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Rockler-F-Style-Clamp-Rack-1.jpg?v=1746825348"},{"product_id":"rockler-hold-down-clamp-5-1-2l-x-1-1-8w","title":"Rockler Hold Down Clamp","description":"\u003cp\u003e\u003cstrong style=\"font-size: 1.4em;\"\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOutfit your workbenches, jigs, or machine tables with the ultimate t-track accessory!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThese Hold Down Clamps feature non-marring rubber tips that are ideal for working with soft woods, pre-finished panels, or anything that's already been prep sanded. The rubber clamp faces also help to grip the workpiece for better safety and accuracy. In addition, they have a wide aluminum body, allowing for maximum tension. Clamps include a 5-star knob and a 5\/16\" T-bolt designed to fit into T-tracks on drill presses, router tables and more. The Hold Down Clamp, 5-1\/2\"L x 3\/4\"W provides the same great features as the 5-1\/2\"L x 1-1\/8\"W version, but in a slimmer width and without the non-marring rubber tips.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5-1\/2\" long x 1-1\/8\" wide\u003c\/li\u003e\n\u003cli\u003eCrafted of solid anodized aluminum\u003c\/li\u003e\n\u003cli\u003eClamps material up to 2-1\/2\" thick\u003c\/li\u003e\n\u003cli\u003eRubber tips help grip and protect workpiece\u003c\/li\u003e\n\u003cli\u003e5\/16\" T-bolt is compatible with our Universal T-Track\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31763159482416,"sku":"35283","price":27.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Rockler-Hold-Down-Clamp-8.jpg?v=1746825344"},{"product_id":"rockler-129-pc-jig-hardware-kit-5-16-18","title":"Rockler 129-Pc Jig Hardware Kit 5\/16\"-18","description":"\u003cp\u003e\u003cstrong style=\"font-size: 1.4em;\"\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll the essential hardware for building or repairing customer jigs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWith all the essential hardware for building or repairing custom jigs, this kit will be a fixture in your shop for years to come. T-bolts will fit all Rockler Universal T-Tracks (#22104, #26420, #20054, sold separately). Bottom plates on 5\/16\"-18 T-bolts measure 9\/16\" W x 7\/8\" L x 7\/64\" H.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31763168002096,"sku":"38160","price":175.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Rockler-129-Pc-Jig-Hardware-Kit-5-16-18-9.jpg?v=1746825341"},{"product_id":"rockler-24-parallel-clamp-rack","title":"Rockler 24'' Parallel Clamp Rack","description":"\u003cspan\u003eOrganize your bulky parallel clamps once and for all. This specially designed rack holds all brands of parallel clamps - up to 12 in all - for easy and convenient storage. Pre-drilled holes are 16\" on center for simple mounting to wall studs. Slotted holes are for attachment to the Pack Rack (#21834, sold separately). Simply drill corresponding holes in the Pack Rack to attach the Parallel Clamp Rack to store parallel clamps up to 50\" in length. Durable galvanized steel construction. 24\" long.\u003c\/span\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31763170164784,"sku":"38498","price":62.37,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Rockler-24-Parallel-Clamp-Rack-4.jpg?v=1746825339"},{"product_id":"rockler-bench-cookie-finishing-cones","title":"Rockler Bench Cookie Finishing Cones","description":"\u003cp\u003e\u003cspan\u003eLift your finishing project off the bench for easy access to all sides. Pointed cones will not mar your finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eLift, grip, protect and finish your project with Bench Cookie Work Grippers and Bench Cookie Finishing Cones! Rockler Bench Cookie Finishing Cones lift your project off your bench with minimal surface contact, keeping it stable during the entire finishing process! Custom sized to fit snugly over the incredibly popular Rockler Bench Cookie Work Grippers. Team a set of Bench Cookie Finishing Cones with a set of Bench Cookie Work Grippers for a fail-safe project finishing system.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEngineered to fit snugly over any Bench Cookie Work Grippers (sold separately)\u003c\/li\u003e\n\u003cli\u003eFinish both sides of a project without slipping or sliding\u003c\/li\u003e\n\u003cli\u003eMinimal surface contact\u003c\/li\u003e\n\u003cli\u003eWon't ruin your finish or mar your wood\u003c\/li\u003e\n\u003cli\u003eNest for easy storage\u003c\/li\u003e\n\u003cli\u003eProtects your Bench Cookie Work Gripper pads from paint and other finish products\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e(4) Bench Cookie Finishing Cones\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31763180879920,"sku":"40607","price":19.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Rockler-Bench-Cookie-Finishing-Cones-1.jpg?v=1746825337"},{"product_id":"rockler-3-piece-silicone-glue-application-kit","title":"Rockler 3-Piece Silicone Glue Application Kit","description":"\u003cp\u003e\u003cstrong style=\"font-size: 1.4em;\"\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eEasy, consistent glue application and effortless cleanup wet glue rinses away and dried glue peels right off!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIn response to the rave reviews for our Silicone Glue Brush, Rockler is now offering the brush bundled with our flexible Silicone Tray and Silicone Spreader, all featuring the same easy cleanup as the original brush. The spreader is ideal for evenly distributing glue over broad surfaces, such as when gluing up plinth blocks, corbels or thick table legs. One swipe with the spreader leaves neat rows of \"raked\" glue, which fill in after a few seconds for perfect distribution. When you're done with your glue-up, just rinse with water, or simply set it aside, and the glue will easily flake off by the following day. The Silicone Tray features a small saddle in the end, which holds your brush so that any stray drips go back into the pan when you're not brushing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNot for use with CA glue.\u003c\/p\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31763193135152,"sku":"43662","price":29.25,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Rockler-3-Piece-Silicone-Glue-Application-Kit-8.jpg?v=1746825335"},{"product_id":"dust-right-dust-separator","title":"Dust Right Dust Separator","description":"\u003cp\u003e\u003cspan\u003eGet better suction from shop vacuum! Turn it into a two stage dust extractor and eliminate clogged filters!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTurn any shop vacuum with a 2-1\/4'' ID outlet into a 2-stage dust and chip separator. When used with most power tools and shop vacuums, the Dust Right Separator captures sawdust, wood chips, and other debris before it enters your vacuum, preventing the loss of suction power caused by a clogged vacuum filter. The five-caster base makes it exceptionally stable and easy to maneuver around the shop. Plus, hoses connect inside the in\/out ports, preventing unintentional disconnections. The Dust Right Separator creates a cyclonic air flow that causes most wood dust particles and other materials that are heavier than air to separate, preventing them from being passed to the vacuum. The vortex effect that is created prevents the loss of suction caused by prematurely clogged filters. For use with shop vacs that are 4HP or more.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10-gallon translucent bucket is easy to empty and easy to tell when it's full\u003c\/li\u003e\n\u003cli\u003eHolds twice the capacity of competitors' products\u003c\/li\u003e\n\u003cli\u003eMaximum performance can be expected when using the Dust Right Separator in woodworking or general shop cleaning applications\u003c\/li\u003e\n\u003cli\u003eIncludes approximately 36'' long flex-form hose to connect to your shop vacuum\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31763223937072,"sku":"45556","price":233.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Dust-Right-Dust-Separator-9.jpg?v=1746825333"},{"product_id":"rockler-silicone-glue-brush","title":"Rockler Silicone Glue Brush","description":"\u003cp\u003eFinally, a glue brush that you'll never have to throw away!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis brush features silicone bristles that are easy to wash with water, and quickly shed dried glue for long-lasting service. They're also spaced to hold plenty of wet glue, meaning less time dipping and more time spreading. Use the narrow dimension for edges and the wide dimension for faces. The paddle end opposite the bristles can be used like a pen for finer detail work such as mortise and tenon, dovetail, and box joints, or like a spatula for spreading glue into grooves and mortises. Also available from Rockler, the 3-Piece Silicone Glue Application Kit (#43662, sold separately).\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003eIt's easy to clean without chemical solvents - even fully dried polyurethane glue cracks and peels right off the bristles - and re-using the brush is also friendly to the environment. When it's time for a glue-up, simply riffle the bristles as you would a deck of cards to peel any dried glue off and restore the brush to pristine condition. Unlike traditional brushes, this one won't shed bristles into your bead of glue. The entire brush is waterproof, so rinsing thoroughly with warm water makes cleanup easy when glue is wet. Silicone Glue Brush measures 7\" long. The tapered brush tip measures 1\" wide x 1\/2\" deep.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eNot for use with CA glue.\u003c\/p\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31763232423984,"sku":"RK45624","price":11.67,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Rockler-Silicone-Glue-Brush-7.jpg?v=1746825331"},{"product_id":"rockler-mini-deluxe-hold-down-clamp","title":"Rockler Mini Deluxe Hold-Down Clamp","description":"\u003cp\u003e\u003cstrong style=\"font-size: 1.4em;\"\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAt only 3-1\/2'' long, this compact version of our popular Deluxe Hold-Down Clamp is ideal for smaller work surfaces, such as benchtop router tables and shop-made jigs. Non-marring rubber tips are ideal for working with soft woods, pre-finished panels, or anything that's already been prep sanded. Hold-down includes a 4-star knob, washer and a 5\/16\" x 3\" T-bolt designed to fit into T-tracks on drill presses, router tables and more.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCrafted of solid anodized aluminum\u003c\/li\u003e\n\u003cli\u003eClamps material up to 2-1\/2\" thick\u003c\/li\u003e\n\u003cli\u003eRubber tips help grip and protect workpiece\u003c\/li\u003e\n\u003cli\u003e5\/16\" T-bolt is compatible with our Universal T-Track\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cb\u003eBest Used With:\u003c\/b\u003e\n\u003cul\u003e\n\u003cli\u003eRockler Universal T-Tracks (#22104, #26420, #20054, all sold separately)\u003c\/li\u003e\n\u003cli\u003eRockler 17-Piece Universal T-Track Kit (#24063, sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31763234816048,"sku":"45692","price":19.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Rockler-Mini-Deluxe-Hold-Down-Clamp-4.jpg?v=1746825330"},{"product_id":"rockler-t-track-flex-hold-arm","title":"Rockler T-Track Flex-Hold Arm","description":"\u003cp\u003e\u003cspan\u003eHolds dust hoses, pneumatic blowers and shop lights in any orientation, at any point along a standard T-track.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAt one point or another, we've all wished we had a third hand around the shop to help hold things when the two we already have are occupied. The T-Track Flex-Hold Arm from Rockler does just that, allowing you to hold and precisely position objects at any point along a length of standard T-track. Use it to attach dust collection hoses, pneumatic blowers for clearing surface dust, work lights and more. With the T-track base, you're free to secure the 18'' snake arm directly in the middle of the table, a capability you don't get with a typical clamp-style base. Use it with our T-track table (#46654), in the accessory track of our router tables, or in the accessory track of our router table fences. With flexibility and articulation like this, the applications are virtually limitless.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy-grip knob locks the arm into the T-track.\u003c\/li\u003e\n\u003cli\u003eIntegral keys in the base prevent unintentional rotation.\u003c\/li\u003e\n\u003cli\u003e18'' flexible gooseneck bends to any orientation, but has sufficient stiffness to resist unintentional movement.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31767035019312,"sku":"50581","price":95.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Rockler-T-Track-Flex-Hold-Arm-8.jpg?v=1746825327"},{"product_id":"rockler-short-stop-for-rockler-t-track-system","title":"Rockler Short Stop For Rockler T-Track System","description":"\u003cp\u003ePair these stops with our T-Track Table for a fast, accurate work holding solution!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCombined with your T-Track Table, these stops give you a fast, accurate work holding solution for a wide variety of applications. The stops feature low-profile knobs that fold flat for easy clearance when sanding or machining. Short Stops can be used on one end of the board to hold your work while belt sanding, hand planning, or scraping dried glue off of a panel. The keyway on the bottom of the Short Stop runs parallel to the stop face. Two other stop styles are available separately: Inline (#54161) with keyway perpendicular to stop face, and Long (#53845) keyway parallel to stop face.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31767035412528,"sku":"50603","price":21.42,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Rockler-Short-Stop-For-Rockler-T-Track-System-7.jpg?v=1746825325"},{"product_id":"dust-right-bench-sweep","title":"Dust Right Bench Sweep","description":"\u003cp\u003e\u003cspan\u003eGobbles up wood shavings and sawdust from your benchtop—use passively with gravity, or with a shop vacuum for added protection from airborne dust.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eKeep your work surfaces pristine by sweeping dust and chips into our convenient ''catch-all'' Bench Sweep. Open the cover and it acts as a backstop to deflect dust and debris down into the funnel as you sweep it off your benchtop. Closing the cover provides the same function as a blast gate. A grid inside the Bench Sweep keeps larger chunks of wood out of your dust collection system, and also helps to save screws, dowels and other bits of valuable hardware that could otherwise be lost.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhen used without a dust collector, you can hang the grid on the back of the Bench Sweep\u003c\/li\u003e\n\u003cli\u003eAdditional hooks on both ends let you store brushes and other essential tools close at hand\u003c\/li\u003e\n\u003cli\u003eKeyhole mounting slots let you easily move the Bench Sweep from table to table\u003c\/li\u003e\n\u003cli\u003eDust port on funnel fits standard 2-1\/2'' dust hose, as well as the Dust Right Shop Vacuum Handle (#55083, sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31767036756016,"sku":"50608","price":42.87,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Dust-Right-Bench-Sweep-9.jpg?v=1746825323"},{"product_id":"dust-right-dust-hose-cord-clips-3-pack","title":"Dust Right Dust Hose Cord Clips 3-Pack","description":"\u003cp\u003e\u003cspan\u003eClips snugly onto your dust hose to hold the power cord in place, preventing twisting and tangling.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAn all-too-familiar problem with dust hoses on handheld or portable power tools is that the hose is always getting tangled up with the tool's power cord. Not anymore with our Dust Hose Cord Clips. These handy little helpers clip snugly onto your dust hose, and feature a channel that holds the power cord neatly in line with the hose. This prevents tangling and twining, and also greatly reduces the chance that you'll trip on the power cord or damage it by stepping on it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClips snugly onto dust hose, holding the power cord in line to prevent twisting and tangling\u003c\/li\u003e\n\u003cli\u003eMade from durable polymer with easy-to-grip texture\u003c\/li\u003e\n\u003cli\u003eInternal rib helps prevent shifting on hose\u003c\/li\u003e\n\u003cli\u003eCord slot accepts power cords from handheld power tools\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rockler Woodworking","offers":[{"title":"1.5\"","offer_id":31767040950320,"sku":"55678","price":19.47,"currency_code":"CAD","in_stock":false},{"title":"2.25\"","offer_id":31767040983088,"sku":"51774","price":25.32,"currency_code":"CAD","in_stock":true},{"title":"2.5\"","offer_id":31767041015856,"sku":"50715","price":25.32,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Dust-Right-Dust-Hose-Cord-Clips-3-Pack-4.jpg?v=1746825322"},{"product_id":"rockler-silicone-micro-glue-brush-set","title":"Rockler Silicone Micro Glue Brush Set","description":"\u003cp\u003eThe finest precision in glue applicators perfect for dowels, dovetails, box joints, veneer repairs and joinery repairs.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFor the finest precision in glue applicators, our Micro Glue Brushes are a perfect fit. Ideal for doweled assemblies, narrow grooves, small dovetails and box joints, veneer repairs, joint repairs and more. They also work great for cleaning glue out of corners, thanks to the squeegee-like silicone material. The set includes a fine point brush, and angled chisel brush, and a tapered flat tip brush with ribs for glue retention. All three boast the easy cleanup of our other silicone tools wet glue rinses off easily, and dried glue peels right off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThree micro brushes with plastic handles and flexible silicone tip profiles for a variety of applications\u003c\/li\u003e\n\u003cli\u003eFine point tip is ideal for applying glue to small round holes or openings\u003c\/li\u003e\n\u003cli\u003eAngled chisel tip is less than 1\/8'' wide great for narrow gaps and small joints, and also can be used to scrape glue from corners\u003c\/li\u003e\n\u003cli\u003eTapered flat tip work well for general applications. The grooved face holds more adhesive, while the smooth face is great for spreading a thin film of glue\u003c\/li\u003e\n\u003cli\u003eEasy cleanup just wipe the tips clean, or allow glue to dry and peel it off\u003c\/li\u003e\n\u003cli\u003eWorks with wood glue and polyurethane glue\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31767043276848,"sku":"50822","price":19.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Rockler-Silicone-Micro-Glue-Brush-Set-9.jpg?v=1746825320"},{"product_id":"dust-right-dust-hose-mounting-bracket","title":"Dust Right Dust Hose Mounting Bracket","description":"\u003cp\u003e\u003cspan\u003eLets you attach a dust hose to your workbench, roller stands, stationary power tools and more.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSometimes, all you need is an open hose to collect some dust kicked up by a belt sander. But hoses are heavy and floppy, and getting them to stay put can be challenging. That's why we've designed our Dust Hose Mounting Bracket so you can easily attach the hose to your workbench, roller stands, stationary power tools and more. With several of them attached to commonly used locations, you can move the hose in seconds. Whether you're collecting lathe chips, chop saw dust or drill press shavings, this hose holder will keep things in place so the dust goes where it belongs.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQuick-release rubber strap is far faster than metal hose clamps and is designed for 4'' hoses\u003c\/li\u003e\n\u003cli\u003eReinforced gusseted steel clamping bracket lets you attach the hose to almost any surface\u003c\/li\u003e\n\u003cli\u003eClamping bracket can be mounted to the hose holder in a variety of positions to fit your application\u003c\/li\u003e\n\u003cli\u003eErgonomic knob with comfortable rubber surround and no-mar swiveling clamp pad\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31767048978480,"sku":"51387","price":50.67,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Dust-Right-Dust-Hose-Mounting-Bracket-5.jpg?v=1746825317"},{"product_id":"rockler-t-track-inline-cam-clamp","title":"Rockler T-Track Inline Cam Clamp","description":"\u003cp\u003eJust slide this mini cam clamp into your T-track and pull the lever to secure your work in position.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhen paired with a T-track table and one or more of our optional T-Track Stops (#50603, sold separately), this little cam clamp provides just enough pressure to keep your work in place as you machine the unobstructed surface. Thanks to the low profile clamp face (only 5\/8'' high), you can easily sand without hitting the clamp. The strip of rubber on the clamp face helps to reduce the chance of marring or slippage. The bottom is also faced with rubber, and features an inline keyed slot that locks into the T-track for further stability. Use with any T-track that accepts 5\/16'' T-bolts, including our optional T-Track Table and many CNC tables.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31767052353584,"sku":"52145","price":54.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Rockler-T-Track-Inline-Cam-Clamp-8.jpg?v=1746825316"},{"product_id":"rockler-rail-coping-sled","title":"Rockler Rail Coping Sled","description":"\u003cp\u003e\u003cstrong style=\"font-size: 1.4em;\"\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSmooth-running sled ensures perfectly square coped rail ends with virtually zero tear-out.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIf you're building cope-and-stick doors and drawer fronts, our new Rail Coping Sled will be an indispensable helpmate. With its smooth-sliding phenolic base, and sturdy toggle clamp holding your stock firmly against the fence, your rails will travel unwaveringly past the cutter for the cleanest, squarest cuts you can imagine. Particularly with drawer fronts, which sometimes use very narrow rails, the sled prevents parts from dipping in too deep and keeps your hands safely out of harm's way. A sacrificial block can be attached to the fence to prevent end grain blowout, while an abrasive strip prevents the workpiece from wandering. Unlike many jigs that use the miter slot, our sled uses only the fence as a reference, so there is no need to waste time aligning the miter slot parallel with the fence. In addition, the coping sled has been redesigned so that the reference edge is a separate clear guide rail elevated 2'' above the table, meaning there is no risk of cutting into the sled.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNew, taller round handles allow a firm, comfortable grip from any angle of approach\u003c\/li\u003e\n\u003cli\u003eSmooth-sliding 3\/8'' thick phenolic base stays rigid and flat when toggle clamp pressure is applied\u003c\/li\u003e\n\u003cli\u003eToggle clamp features easy, tool-free adjustments and one-handed operation\u003c\/li\u003e\n\u003cli\u003eClear, elevated guide runs against fence, offering a large, smooth-running reference edge without having to cut into the sled\u003c\/li\u003e\n\u003cli\u003eClear guide runs 2'' above the table, so it works with most router table fences on the market (all Rockler and Bench Dog fences)\u003c\/li\u003e\n\u003cli\u003eSacrificial block is easily replaceable to accommodate different profiles\u003c\/li\u003e\n\u003cli\u003eMaximum workpiece dimension is 5'' wide x 1-1\/4'' thick\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31767057629232,"sku":"52149","price":194.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Rockler-Rail-Coping-Sled-7.jpg?v=1746825314"},{"product_id":"rockler-schedule-40-pvc-to-4-adapter-for-fittings","title":"Rockler Schedule 40 Pvc To 4 Adapter For Fittings","description":"\u003cp\u003e\u003cstrong style=\"font-size: 1.4em;\"\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLets you connect a 4'' dust collection fitting directly to schedule 40 PVC plumbing pipe.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe large end of this adapter fits around Schedule 40 PVC pipe, while the smaller end fits over 4'' dust collection fittings, such as our 4'' Elbow Connector and 4'' ''Y'' Connector (#88527 and #88519, sold separately). A hose clamp is included for easy connection of the PVC end. The adapter is made from a combination of rubber on the PVC end and hard plastic on the hose end. Look for schedule 40 PVC at your local home center.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31767060348976,"sku":"52680","price":38.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Rockler-Schedule-40-Pvc-To-4-Adapter-For-Fitt-3760.jpg?v=1777839606"},{"product_id":"dust-right-lathe-dust-collection-system","title":"Dust Right Lathe Dust Collection System","description":"\u003cp\u003e\u003cspan\u003eThis highly adjustable steel boom arm holds a semi-cylindrical dust scoop that closely cups your small turning projects, capturing nearly all dust!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePen turners and spindle turners will instantly recognize the efficiency and utility of our Dust Right Lathe Dust Collection System. The centerpiece of the system is our proprietary C-shaped ''dust scoop,'' which wraps around spindle turnings to catch dust right at the source. Add to that a highly adjustable solid steel boom arm support system and a flex-form hose to connect to your dust collection system, and you have an all-in-one package that will dramatically reduce the amount of dust in the air and on the floors of your shop. The boom arm assembly can be easily slid along the bed of your lathe to collect dust wherever you are cutting, and is height adjustable within a 15'' range. It can also be adjusted in and out along the slot in the plate, and pivoted at three points to provide an incredible variety of positioning options.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e9'' long dust scoop surrounds your spindle turnings for efficient, effective dust collection\u003c\/li\u003e\n\u003cli\u003eSupport system is constructed from heavy-duty steel for rigidity and durability\u003c\/li\u003e\n\u003cli\u003eIncluded flex form hose fits the dust scoop without a hose clamp, and moves easily as the scoop is repositioned; opposite end fits standard 2-1\/2'' O.D. fittings\u003c\/li\u003e\n\u003cli\u003eSystem is compatible with most lathes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31767062085680,"sku":"52981","price":165.75,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Dust-Right-Lathe-Dust-Collection-System-9.jpg?v=1746825311"},{"product_id":"rockler-3-in-1-bar-gauge","title":"Rockler 3-In-1 Bar Gauge","description":"\u003cp\u003e\u003cspan\u003eThree sets of interchangeable tips let you check diagonals for square, transfer dimensions, draw perfect circles and more!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSometimes the oldest, most basic tools can turn out to be the most efficient ones. Our 3-in-1 Bar Gauge, a refinement of a time-honored cabinetmaker's tool, is certainly one of them. It doesn't quibble over metric or imperial measurements, or even any measurements at all. It simply tells you if your frame, drawer or case is square, or whether the part will fit. It includes three sets of interchangeable tips that let you check diagonals for square, transfer measurements and even scribe circles. All this at a fraction of the price of similar bar gauges on the market. Use commonly available 3\/8'' dowel stock (supplied by the user) to obtain whatever length you need for your most typical projects.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31767062380592,"sku":"53052","price":115.17,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Rockler-3-In-1-Bar-Gauge-4.jpg?v=1746825309"},{"product_id":"dust-right-4-hose-handle-docking-port-kit","title":"Dust Right 4'' Hose \u0026 Handle Docking Port Kit","description":"\u003cp\u003e\u003cspan\u003eA convenient storage solution for the Dust Right 4'' Quick Change Handle and Expandable Hose.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eNeed a parking spot for your Dust Right handle and hose? Look no further than our 4'' Hose and Handle Docking Port Kit. It consists of two rubber straps that mount to the wall, plus a wall-mounted docking port for the handle. With the dust collector turned on, dock the handle on the port and the hose will squeeze itself under suction into a compact tube. Then simply strap the tube to the wall, turn off your dust collector, and everything is neatly stowed, off the floor, and out of the way.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProvides compact, convenient storage for your 4'' Expandable Hose (e.g. #58957 and #57111, sold separately) and 4'' Quick Change Handle (#55027, sold separately)\u003c\/li\u003e\n\u003cli\u003eDocking port cuts off suction so the hose retracts itself into a compact length\u003c\/li\u003e\n\u003cli\u003eDurable straps securely fasten the 4'' Expandable Hose to the wall\u003c\/li\u003e\n\u003cli\u003eReinforced brackets are pre-drilled for mounting to wall studs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31767071686704,"sku":"53568","price":54.6,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Dust-Right-4-Hose-Handle-Docking-Port-Kit-8.jpg?v=1746825306"},{"product_id":"rockler-drill-press-fence","title":"Rockler Drill Press Fence","description":"\u003cp\u003e\u003cstrong style=\"font-size: 1.4em;\"\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eA full-featured, fully adjustable fence for your drill press includes instructions to build your own drill press table!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eGet easy adjustability and precise repeatability on your drill press with the Rockler Drill Press Fence. The fence features adjustable MDF faces that let you straddle large forstner bits and sanding spindles, plus a flip-down stop for precise placement of a wide variety of holes. The included low-profile dust port fitting is specially designed for minimal obstruction with the drill press column, retaining up to 3'' more throat depth over typical dust ports. It also angles up and away to keep the hose from impeding movement of the fence on the table. You can design your own drill press table or build the table outlined in the instructions, a design that's easily customized to fit the needs of your drill press. Mounted via T-tracks or thru-slots, the fence is quickly positioned and secured with the included hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade of durable materials, including ABS dust port, extruded aluminum fence and MDF sub-fences\u003c\/li\u003e\n\u003cli\u003eFence comes fully assembled\u003c\/li\u003e\n\u003cli\u003eMDF sub-fences adjust laterally without tools\u003c\/li\u003e\n\u003cli\u003eUpward facing T-track allows addition of included flip stop and other optional accessories\u003c\/li\u003e\n\u003cli\u003eAdditional flip stops available (#31214, sold separately)\u003c\/li\u003e\n\u003cli\u003e2-1\/2'' split in fence provides room for included dust port\u003c\/li\u003e\n\u003cli\u003eLow profile dust port minimizes interference of fence with drill press column\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31767076175920,"sku":"53648","price":179.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Rockler-Drill-Press-Fence-1.jpg?v=1746825305"},{"product_id":"dust-right-4-quick-change-shop-and-tool-set","title":"Dust Right 4'' Quick Change Shop And Tool Set","description":"\u003cp\u003e\u003cspan\u003eFloor Sweep and Bench Nozzle let you clean up in comfort, while the Quick Change Handle and Tool Port let you connect to a stationary power tool.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Dust Right Quick Change Shop and Tool Set lets you quickly tap into the two primary uses of the Quick Change system: shop cleanup and dust collection. The Floor Sweep and Bench Nozzle attach to the Quick Change Handle for fast, convenient cleanup, and the handle also slips onto the Tool Port for dust collection at a power tool. The long floor sweep encourages good posture, rides smoothly on rubber wheels, and features a removable grate to filter out large chunks. The Bench Nozzle takes the dust clouds out of sweeping off your benchtop, since dust goes directly into your collector. The beauty of the system as a whole is that instead of permanently plumbing each of your power tools for dust, the Quick Change Handle lets you move a single hose from machine to machine. You'll be able to use a smaller, less expensive dust collector, and with no need for permanent ductwork, your machines can stay mobile. Just keep the handle attached to the 4'' hose on your dust collector and you can move from task to task like never before.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSweep rolls smoothly on rubber wheels\u003c\/li\u003e\n\u003cli\u003eRemovable grate in sweep filters out large chunks that could damage the impeller in your dust collector (Note: Turn off your dust collector when removing the grate)\u003c\/li\u003e\n\u003cli\u003eBench Nozzle provides extended reach and features brushes for removing caked-on dirt and dust\u003c\/li\u003e\n\u003cli\u003eLarge, rugged ergonomic handle has two connection points for far greater strength\u003c\/li\u003e\n\u003cli\u003eAngled design of handle lessens strain on the hose, and lessens wrist fatigue caused by the weight of the hose\u003c\/li\u003e\n\u003cli\u003eAir flow adjustment valve on handle lets you reduce air flow to prevent floor mats and other items from sealing off the opening\u003c\/li\u003e\n\u003cli\u003eFour spring clips let you hang the cleanup tools on the wall for convenient access\u003c\/li\u003e\n\u003cli\u003eTool Port features a flexible rubber boot on one end that guarantees a tight connection and allows for slight variations in the size of the tool's dust port\u003c\/li\u003e\n\u003cli\u003eAdditional Dust Right Tool Ports sold separately for connection to multiple power tools\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31767082106928,"sku":"53733","price":253.47,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Dust-Right-4-Quick-Change-Shop-And-Tool-Set-9.jpg?v=1746825303"},{"product_id":"rockler-long-stop-for-rockler-t-track-system","title":"Rockler Long Stop For Rockler T-Track System","description":"\u003cp\u003e5'' length works perfectly in pairs for face frame assembly, or alone for belt sanding or scraping.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCombined with your T-Track Table, these stops give you a fast, accurate work holding solution for a wide variety of applications. The stops feature low-profile knobs that fold flat for easy clearance when belt sanding, hand planning, or scraping dried glue. Long Stops are also ideally suited for pocket hole face frame assembly. Use two Long Stops to create a square corner to support your face frame parts while drilling. The increased length of the Long Stop spans the joint line, allowing you to easily flush up rails and stiles by butting them against the stop. This is also handy when assembling cope and stick doors. The keyway on the bottom of the Long Stop runs parallel to the stop face. Two other stop styles are available separately: Short (#50603) and Inline (#54161) with keyway perpendicular to stop face.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31767084630064,"sku":"53845","price":29.22,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Rockler-Long-Stop-For-Rockler-T-Track-System-2.jpg?v=1746825301"},{"product_id":"rockler-inline-stop-for-rockler-t-track-system","title":"Rockler Inline Stop For Rockler T-Track System","description":"\u003cp\u003e\u003cstrong style=\"font-size: 1.4em;\"\u003eProduct Description \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePair these stops with our T-Track Table for a fast, accurate work holding solution!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCombined with your T-Track Table, these stops give you a fast, accurate work holding solution for a wide variety of applications. The stops feature low-profile knobs that fold flat for easy clearance when sanding or machining. Inline Stops are useful when you want to sandwich a board between two stops so you can scrape, sand or plane in either direction. If you need light clamping pressure, tap a pair of carpenter's shims between one of the stops and you have a very secure holding system for light routing tasks or carving. The keyway on the bottom of the Inline Stop runs perpendicular to the stop face. Two other stop styles are available separately: Short (#50603) and Long (#53845) both with keyways parallel to stop face.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31767086071856,"sku":"54161","price":23.37,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Rockler-Inline-Stop-For-Rockler-T-Track-Syste-3744.jpg?v=1777839827"},{"product_id":"rockler-auto-lock-t-track-hold-down-clamp","title":"Rockler Auto-Lock T-Track Hold Down Clamp","description":"\u003cp\u003e\u003cstrong style=\"font-size: 1.4em;\"\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAutomatically adjusts for thicknesses from 0'' to 2-3\/4'' securing your work is as fast and easy as flipping a switch!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eTightening Rockler's new Auto-Lock T-Track Hold Down Clamp is literally an open-and-shut case just press down the lever to secure anything from veneer sheets to lumber up to 2-3\/4'' thick! Once set, the clamping pressure is always the same regardless of workpiece size, and is adjusted only if needed with the set screw. The clamp pivots 360°, allowing you to clamp near the workpiece edge to minimize obstructions. A large knurled wheel locks the clamp securely to the T-track. The toggle foot is adjusted with the knurled aluminum knob for best placement no wrenches required while the clamping foot pivots on a ball joint so it can adapt to any angle and is rubber coated to prevent marring. Simply lift the lever to release.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAuto-adjust mechanism allows you to clamp various thicknesses without readjusting\u003c\/li\u003e\n\u003cli\u003eCenter of clamping foot extends from 1-1\/2'' to 3-1\/2'' from center of track\u003c\/li\u003e\n\u003cli\u003eMax height capacity is 2-3\/4''\u003c\/li\u003e\n\u003cli\u003eClamping force is adjustable from 5-250lbs of pressure\u003c\/li\u003e\n\u003cli\u003eLarge locking wheel secures clamp to T-track\u003c\/li\u003e\n\u003cli\u003eClamps slide into any T-track that accepts 5\/16'' T-bolts, including our T-Track Table (#46654, sold separately) and many of the CNC Shark tables\u003c\/li\u003e\n\u003cli\u003eHeavy-duty metal construction\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31767088955440,"sku":"54280","price":87.75,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Rockler-Auto-Lock-T-Track-Hold-Down-Clamp-2.jpg?v=1746825298"},{"product_id":"rockler-contour-sanding-grips","title":"Rockler Contour Sanding Grips","description":"\u003cp\u003e\u003cspan style=\"font-size: 1.4em;\"\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIdeal for sanding both inside and outside curves on moldings, dowels, edging, fluting and more.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOur double-ended contour sanding blocks make it easy to sand both concave and convex shapes without distorting or diminishing the crispness of the profile. Each Sanding Grip has a convex profile on one end and a concave profile on the opposite end. The two ends are connected by a narrow flexible section that provides a comfortable grip, and can also be used for sanding. Made from a flexible rubber that adapts to minor variations in diameter. Grippy texture prevents abrasive slipping and hand fatigue. Set includes a total of six blocks with the following inside\/outside diameters: 1\/4'', 3\/8'', 1\/2'', 5\/8'', 3\/4'' and 7\/8''. Diameters are molded into the rubber for easy selection.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31767149903920,"sku":"54412","price":31.17,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Rockler-Contour-Sanding-Grips-0.jpg?v=1746825297"},{"product_id":"dust-right-mountable-dust-coupler","title":"Dust Right Mountable Dust Coupler","description":"\u003cp\u003e\u003cspan\u003eMount this hose coupler to the wall or the workbench for a convenient way to connect tools to your dust system, or to join hoses.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2-1\/2'' Mountable Dust Coupler:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eFor tools that use 2-1\/2'' dust hose, this coupler makes connection and disconnection quick and easy. Simply mount the coupler within easy reach, whether on the workbench or the wall, then attach dust collection to the fitting as needed. With the port easily visible and easily accessible, you won't need to bend over and search under and behind power tools for the well-hidden stock dust ports. The coupler fits inside standard 2-1\/2'' dust hose, and also fits the Dust Right Universal Small Port Hose Kit (#48212, sold separately). It may also be used to join two hoses together for long dust runs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMounts easily wherever you need a quick-connect 2-1\/2'' hose fitting or fixed coupler\u003c\/li\u003e\n\u003cli\u003eGreat for moving a single shop-vacuum hose from tool to tool\u003c\/li\u003e\n\u003cli\u003e2-1\/2'' OD fits inside dust hose and 2-1\/4'' ID fits Dust Right Universal Small Port Hose Kit (#48212, sold separately)\u003c\/li\u003e\n\u003cli\u003eReinforced mounting holes allow installation on top or underside of benches or tables, the side of a cabinet or on a backer board on the wall with appropriate screws (not included)\u003c\/li\u003e\n\u003cli\u003eMade from reinforced ABS plastic for strength and durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4'' Mountable Dust Coupler:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eFor tools that use 4'' dust hose, this coupler makes connection and disconnection quick and easy. Simply mount the coupler within easy reach, whether on the workbench or the wall, then attach dust collection to the fitting as needed. With the port easily visible and easily accessible, you won't have to stoop and search under and behind power tools for the well-hidden stock dust ports. The coupler has a stepped design that fits both 4'' dust hose, and the Dust Right 4'' Quick Change Handle (#55027, sold separately). It may also be used to join two hoses together for long dust runs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMounts easily wherever you need a quick-connect 4'' hose fitting or stationary coupler\u003c\/li\u003e\n\u003cli\u003eGreat for moving a single 4'' dust hose from tool to tool\u003c\/li\u003e\n\u003cli\u003eStepped design fits both 4'' hoses and Dust Right 4'' Quick Change Handle (#55027, sold separately)\u003c\/li\u003e\n\u003cli\u003eReinforced mounting holes allow installation on top or underside of benches or tables, the side of a cabinet or on a backer board on the wall with appropriate screws (not included)\u003c\/li\u003e\n\u003cli\u003eMade from reinforced ABS plastic for strength and durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003e2-1\/2'' to 4'' Mountable Dust Coupler:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis coupler makes connection and disconnection of 2-1\/2'' and 4'' dust hoses quick and easy. Simply mount the coupler within easy reach, whether on the workbench or the wall, then attach dust collection to the fitting as needed for a fixed dust coupler. You can leave the smaller end open for swapping between various smaller tools, or leave the larger end open so you can move a main 4'' hose between that port and other larger tools. With the port easily visible and easily accessible, you won't have to stoop and search under and behind power tools for the well-hidden stock dust ports. The 4'' end has a stepped design that fits both 4'' dust hose, and the Dust Right 4'' Quick Change Handle (#55027, sold separately). The 2-1\/2'' end fits inside standard 2-1\/2'' dust hose, and over the nozzle of the Dust Right Universal Small Port Hose Kit (#48212, sold separately). \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMounts easily wherever you need a quick-connect 2-1\/2'' or 4'' dust hose adapter or stationary coupler\u003c\/li\u003e\n\u003cli\u003eMakes it easy to move a single dust hose from tool to tool\u003c\/li\u003e\n\u003cli\u003e4'' end is stepped to fit both 4'' hoses and Dust Right 4'' Quick Change Handle (#55027, sold separately)\u003c\/li\u003e\n\u003cli\u003e2-1\/2'' end fits inside 2-1\/2'' dust hose and over Dust Right Universal Small Port Hose Kit (#48212, sold separately)\u003c\/li\u003e\n\u003cli\u003eReinforced mounting holes allow installation on top or underside of benches or tables, the side of a cabinet or on a backer board on the wall with appropriate screws (not included)\u003c\/li\u003e\n\u003cli\u003eMade from reinforced ABS plastic for strength and durability\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rockler Woodworking","offers":[{"title":"2 1\/2\"","offer_id":31767152394288,"sku":"54955","price":25.32,"currency_code":"CAD","in_stock":true},{"title":"4\"","offer_id":31767152427056,"sku":"58448","price":33.12,"currency_code":"CAD","in_stock":true},{"title":"2 1\/2\"-4\"","offer_id":31767152459824,"sku":"59056","price":33.12,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Dust-Right-Mountable-Dust-Coupler-2.jpg?v=1746825295"},{"product_id":"dust-right-4-quick-change-handle","title":"Dust Right 4'' Quick Change Handle","description":"\u003cp\u003e\u003cspan\u003eQuickly move a single 4'' dust hose from machine to machine (required Tool Ports sold separately), or slip on a variety of optional cleaning attachments.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eOur 4\" Quick Change Handle is the centerpiece of a simple, affordable dust collection and shop cleanup system. Rather than permanently plumbing each of your power tools for dust, an expensive, space-consuming venture, the Quick Change Handle lets you move a single hose from machine to machine. This approach lets you use a smaller, less expensive dust collector. Since there is no need for permanent rigid ductwork, it's also easier to keep your machines mobile, an essential element of any small shop. When used with stationary tools, the handle fits snugly onto any of our Dust Right Tool Ports (sold separately), which are fastened securely to the stationary tool. When it's time to clean up, the handle also connects to a variety of convenient cleaning accessories (sold separately).\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLarge ergonomic handle with two sturdy points of connection to the main duct\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAngled design lessens strain on the hose, and lessens wrist fatigue caused by the weight of the hose\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAir flow adjustment valve lets you reduce air flow to prevent floor mats and other items from sealing off the opening\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31767160029232,"sku":"55027","price":38.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Dust-Right-4-Quick-Change-Handle-6.jpg?v=1746825294"},{"product_id":"rockler-compact-router-ellipse-and-circle-jig","title":"Rockler Compact Router Ellipse And Circle Jig","description":"\u003cp\u003e\u003cstrong style=\"font-size: 1.4em;\"\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003eNow you can use your compact plunge router to create fast, accurate ellipses, circles and sweeping arcs no math or advanced drafting skills required!\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/span\u003eWoodworkers who tend toward smaller projects will love our Rockler Compact Router Ellipse and Circle Jig. It features all of the easy smooth-sliding functionality of its bigger brother (#27712, sold separately), but is used with a lightweight, easy-to-maneuver compact plunge router. Ideal for cutting out the shape of small signs, tabletops and frames, it can cut ellipses from as small as 6'' x 11'' to as large as 19'' x 24'', and circles from 6'' to 24'' in diameter. Set up takes only a couple of minutes and using the jig is just as easy. As you move the router through the cut, the jig's sliding dovetail mechanism keeps the router precisely on the cut line.\u003c\/p\u003e\n\u003cspan\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from durable, smooth-sliding phenolic\u003c\/li\u003e\n\u003cli\u003eFits Porter-Cable, Dewalt and Bosch Compact Plunge Routers (#41770 and #41462, sold separately)\u003c\/li\u003e\n\u003cli\u003eSetup is easy following the setup diagrams printed directly on the jig\u003c\/li\u003e\n\u003cli\u003eSliding dovetail ways ensure accuracy and ease-of-use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31767162224688,"sku":"55819","price":155.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Rockler-Compact-Router-Ellipse-And-Circle-Jig-7.jpg?v=1746825292"},{"product_id":"rockler-center-offset-marking-tool","title":"Rockler Center\/Offset Marking Tool","description":"\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eStraddles your board to mark a perfectly centered line, or you can use the notches to mark offset lines from 1\/16'' to 1\/2'' from the edge in 1\/16'' increments.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur Center\/Offset Marking Tool straddles your board to mark a perfectly centered line along the face or edge of boards up to 1-1\/2'' wide or thick. Just insert your pencil into the center hole, rotate the tool so the guide posts contact the material, then scribe. Alternatively, you can use a pencil in the notches to mark lines from 1\/16'' to 1\/2'' from the edge in precise 1\/16'' increments. It's great for marking out mortises and rabbets, or for making reference lines for drilling holes. The tool accepts standard wooden pencils and has an onboard pencil storage slot. An embedded magnet lets you store it on any ferrous metal surface, such as a power tool, tool chest or magnetic storage strip.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits standard wooden pencils\u003c\/li\u003e\n\u003cli\u003eCenter hole holds pencil in perfectly centered position as you scribe your line\u003c\/li\u003e\n\u003cli\u003eNotches for offset marking let you scribe off-center lines, or lines near the edge of large panels\u003c\/li\u003e\n\u003cli\u003eOffset notches account for the tip width of a sharpened pencil for an accurately scribed line\u003c\/li\u003e\n\u003cli\u003eIntegral magnet allows easy storage on ferrous metal surfaces\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31767169859632,"sku":"56094","price":33.57,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Rockler-Center-Offset-Marking-Tool-5.jpg?v=1746825290"},{"product_id":"rockler-silicone-project-mat","title":"Rockler Silicone Project Mat","description":"\u003cp\u003eFeatures the same non-stick properties as our silicone glue tools dried glue peels right off!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur protective project mat is made from heat-resistant, easy-to-clean silicone, meaning wet glue rinses off and dried glue peels off. Use it anywhere you want to protect your work surface or your project, whether in the garage, shop or on the dining room table. Since it's heat-resistant, it works well as a protective barrier for hot glue guns. The material is very soft, and one side has a textured surface to trap debris that could scratch or dent your project. Also great for craft projects, art projects and scrapbooking.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSilicone material is heat-resistant and easily cleaned dried glue peels right off\u003c\/li\u003e\n\u003cli\u003eRolls up for easy storage\u003c\/li\u003e\n\u003cli\u003eNo memory always lays flat when in use\u003c\/li\u003e\n\u003cli\u003eRibbed pattern on one face helps protect your project by trapping abrasive debris; opposite face is smooth\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNot for use with CA glue.\u003c\/p\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31767170187312,"sku":"56209","price":64.32,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Rockler-Silicone-Project-Mat-8.jpg?v=1746825289"},{"product_id":"rockler-schedule-40-pvc-to-4-adapter-for-hose","title":"Rockler Schedule 40 Pvc To 4\" Adapter For Hose","description":"\u003cp\u003e\u003cspan\u003eLets you connect a 4'' dust hose directly to schedule 40 PVC plumbing pipe.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe large end of this adapter fits around Schedule 40 PVC pipe, while the smaller end fits inside a standard 4'' dust hose. A hose clamp is included for easy connection of the PVC end. The adapter is made from a combination of rubber on the PVC end and hard plastic on the hose end. Look for schedule 40 PVC at your local home center.\u003c\/span\u003e\u003c\/p\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31767180083248,"sku":"56472","price":38.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Rockler-Schedule-40-Pvc-To-4-Adapter-For-Hose-3.jpg?v=1746825287"},{"product_id":"auxiliary-ports-for-dust-right-flexiport-power-tool-hose-kit-3-to-12-expandable","title":"Flexiport Power Tool Hose Kit End Fittings","description":"\u003cp\u003e\u003cspan\u003eTwo additional sizes of flexible port adapters to complement your FlexiPort Power Tool Hose Kit (#48212, sold separately).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThese two auxiliary ports complement those already included in the Expandable FlexiPort Power Tool Hose Kit (#48212, sold separately). The inside diameters are slightly smaller, allowing you to fit the dust hose onto an even wider variety of tools. As with the originals, the flexible rubber stretches slightly, and conforms easily to oddly shaped ports. The other end of each port threads securely into the stretch hose included with the FlexiPort Power Tool Hose Kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eThe two FlexiPort hose systems‚12' Fixed-Length and 3' to 12' Expandable‚ are NOT cross compatible. FlexiPorts with the black threads fit the Expandable Hose only, and FlexiPorts with the gray collar fit the 12' Fixed-Length Hose only.\u003c\/p\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31767187095600,"sku":"56613","price":31.17,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Flexiport-Power-Tool-Hose-Kit-End-Fittings-4.jpg?v=1746825285"},{"product_id":"rockler-hd-clamp-rack","title":"Rockler HD Clamp Rack","description":"\u003cp\u003e\u003cstrong style=\"font-size: 1.4em;\"\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eKeeps your long, heavy clamps at eye level and organized into two neat rows.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe customary way of storing pipe clamps in a jumble in the corner is certainly inexpensive, but it can be equally irritating. Trying to untangle one clamp from the rest is a chore that can result in the whole pile crashing to the floor. With the Rockler HD Clamp Rack, you can say goodbye to those hassles. This rack features stepped slots that accepts both pipe clamps and parallel clamps, and keeps them organized in two neat rows. Made of sturdy, 12 gauge steel, it can support a full rack of clamps up to 60'' long. The footprint is very compact, saving you both wall space and floor space.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAccepts 12 clamps total (6 on each side), each up to 60'' long\u003c\/li\u003e\n\u003cli\u003eEach slot can accept either a pipe clamp or a parallel clamp\u003c\/li\u003e\n\u003cli\u003eFits majority of pipe and parallel clamps on the market\u003c\/li\u003e\n\u003cli\u003eHeavy-duty design is ideal for longer clamps\u003c\/li\u003e\n\u003cli\u003eMade of sturdy 12 gauge galvanized steel\u003c\/li\u003e\n\u003cli\u003eTwo-piece design provides support to eliminate sagging\u003c\/li\u003e\n\u003cli\u003eNarrow, space-saving footprint\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31767198335024,"sku":"57164","price":143.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Rockler-HD-Clamp-Rack-7.jpg?v=1746825283"},{"product_id":"rockler-glue-applicator-set","title":"Rockler Glue Applicator Set","description":"\u003cp\u003e\u003cstrong style=\"font-size: 1.4em;\"\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll your gluing needs in one versatile, easy-to-clean kit!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWith four glue applicators included a Standard Glue Spout, a silicone brush for wider boards, a roller for very wide boards, and a mortise tip for traditional mortises, domino mortises and biscuit slots this kit lets you deposit glue precisely where you want it, with minimal squeeze-out. The centering attachment fits onto the Standard Spout to keep your glue bead locked on center when edge gluing, while the funnel makes transferring glue from jug to bottle a mess-free experience. Attachments also fit onto Titebond 16 and 32 oz glue bottles. All attachments are made from easy to clean materials: HDPE plastic, polypropylene, silicone and thermoplastic rubber.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cstrong\u003eGlue Line Centering Attachment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWhen gluing up panels, simply rotate the bottle to center the glue tip on the edge of the lumber no more wavy lines\u003c\/li\u003e\n\u003cli\u003eAttachment friction fits onto the Standard Glue Spout\u003c\/li\u003e\n\u003cli\u003eMaximum lumber thickness: 1-1\/8''\u003c\/li\u003e\n\u003cli\u003eDelrin guide bars\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cstrong\u003eSilicone Glue Brush Applicator\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOur famous easy-to-clean, reusable glue brush without the need to dip just squeeze the bottle gently to load the brush\u003c\/li\u003e\n\u003cli\u003eSilicone bristles are easy to wash with water, and quickly shed dried glue for long-lasting service\u003c\/li\u003e\n\u003cli\u003eDried glue peels off easily to restore the brush to pristine condition\u003c\/li\u003e\n\u003cli\u003eUnlike traditional brushes, the silicone brush won't shed bristles into your bead of glue\u003c\/li\u003e\n\u003cli\u003eThreads compatible with Titebond 16 and 32 oz bottles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cstrong\u003eGlue Roller Applicator\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGlue Roller body and axle are made of polypropylene plastic, and roller is made of thermoplastic rubber all easy-to-clean\u003c\/li\u003e\n\u003cli\u003eLarge, elongated tip hole for good flow\u003c\/li\u003e\n\u003cli\u003eErgonomically designed with angled head\u003c\/li\u003e\n\u003cli\u003eTip is easily visible so you can gauge your glue flow visually\u003c\/li\u003e\n\u003cli\u003eThread is compatible with Titebond 16 and 32 oz bottles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cstrong\u003eMortise Glue Applicator\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlattened design fits into traditional mortises, Domino mortises, biscuit slots and other grooves that traditional spouts can't reach into\u003c\/li\u003e\n\u003cli\u003eThread is compatible with Titebond 16 and 32 oz bottles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cstrong\u003eGlue Funnel\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThreads onto your glue bottle to make transferring glue from jug to bottle drip-free\u003c\/li\u003e\n\u003cli\u003eThread is compatible with Titebond 16 and 32 oz bottles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cstrong\u003eCleaning Brush\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNarrow profile and flexible wire handle make it easy to reach into the tight spaces of the mortise tip and roller\u003c\/li\u003e\n\u003cli\u003eDouble-ended with two brush types: stiff bristles and soft bristles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eNot for use with CA glue.\u003c\/p\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31767201349680,"sku":"57361","price":38.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Rockler-Glue-Applicator-Set-2.jpg?v=1746825281"},{"product_id":"dust-right-router-table-dado-dust-chute","title":"Dust Right Router Table Dado Dust Chute","description":"\u003cp\u003e\u003cstrong style=\"font-size: 1.4em;\"\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAward winning product captures the jet of dust that shoots out of the dado while routing bristles extend above the table to stop dust in its tracks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIf you've ever routed dados on the router table, you know that the conventional dust port doesn't do much good. Since the dado itself encapsulates the router bit, the dust gets shot out of the dado sideways, well out of range of the fence port. Rockler has solved the problem with the Dado Dust Chute, a clever device that attaches to the side of your router table to capture the jet of dust before it ever hits the floor. Adjustable bristles in the Dust Chute can be raised just above the table to stop the dust as it shoots over the edge, but the bristles bend easily out of the way as you slide your workpiece across the table. Once installed, you can leave it in place, since the integral blast gate lets you close it off when not needed, and the bristles can be easily lowered if necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCaptures the dust stream that shoots out of the dado or groove while routing\u003c\/li\u003e\n\u003cli\u003eSecondary chute catches dust that falls through fence-mounting slots in router table\u003c\/li\u003e\n\u003cli\u003eAdjustable bristles stop dust as it shoots off the edge of the table\u003c\/li\u003e\n\u003cli\u003eBristles also clear debris from the routed groove without interfering with workpiece movement, and retract when not in use\u003c\/li\u003e\n\u003cli\u003eBuilt-in blast gate allows you to regulate suction and close off the chute when not needed\u003c\/li\u003e\n\u003cli\u003eAccepts 2-1\/2'' dust hose\u003c\/li\u003e\n\u003cli\u003eMounting screws included\u003c\/li\u003e\n\u003cli\u003ePatent pending\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eRequires a minimum 3'' table overhang along the installation edge.\u003c\/p\u003e","brand":"Rockler Woodworking","offers":[{"title":"Default Title","offer_id":31767202529328,"sku":"57495","price":58.47,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/products\/Dust-Right-Router-Table-Dado-Dust-Chute-6.jpg?v=1746825277"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0072\/4880\/5947\/collections\/Rockler-7.jpg?v=1689654615","url":"https:\/\/greatwesternsaw.com\/collections\/rockler\/router-accessories.oembed","provider":"Great Western Saw ","version":"1.0","type":"link"}