

Protec-Kote Deck Screws - 700ct.
SDK-C2W-700
Regular price $93.89Product Description
700 Protec-Kote 2" (51mm) Deck Screws
Enough for a 10' (3048mm) x 20' (6096mm) deck with 16" (406mm) joists
For use with the Kreg Deck Jig
3 anti-corrosion layers to prevent rust
Perfect for many outdoor applications
Great for ACQ-treated lumber
Rip-Cut
KMA2685
Regular price $54.39Product Description
Turn an ordinary circular saw into a precision edge-guided cutting tool
Great projects start with high-quality cuts, and you can make those cuts — more easily than you ever imagined — using your circular saw plus the Rip-Cut Circular Saw Edge Guide.
The Kreg Rip-Cut turns your circular saw into a precision edge-guided cutting tool that makes straight, accurate, repeatable cuts in plywood, MDF, and other large sheets. With the Rip-Cut, you can cut with the confidence you want and the precision you need.
The Rip-Cut easily makes straight, accurate, repeatable cuts without measuring, marking, or having to keep the saw on the cut line. The Rip-Cut does this with a long edge guide that follows the straight edge of the sheet you are cutting. So, all you have to do is lock the saw in at the measurement you want — up to 24" — using the built-in measuring scale, and then make your cut.
With a built-in measuring scale, you don’t have to measure and mark each cut, either. Just lock the saw sled at your desired cut width, and you're all set, whether you need to cut one piece or make multiple pieces of the exact same size. Plus, the Rip-Cut makes it easier to cut down large sheets by yourself.
The Rip-Cut is very easy to use. Simply mount your saw to the Universal Sled — it accepts most left-blade or right-blade saws — and then slide the sled onto the aluminum rail. After a simple one-time calibration, you can lock in your cut width (up to 24") using the measuring scale and precision cursor. Then, just hold the edge guide against the edge of your sheet as you guide the saw. You’ll get straight, accurate, repeatable cuts easily every time.
Stainless Steel Pocket-Hole Screws (100CT)
SML-C125S5-100
Regular price $34.39Product Description
Kreg Stainless Screws are specially designed for maritime applications, excessive exposure to water, and other exceedingly corrosive environments, such as ACQ-treated lumber. If you're looking for the best in rust-prevention, this is your solution.
Precision Router Table Stop
PRS7850
Regular price $47.59Product Description
Bring greater accuracy and repeatability to your Kreg Precision Router Table with this uniquely-designed stop. Features a low-profile, aluminum design, made to flip out of the way when not in use. The included Precision Lens Cursor gives you a clear and accurate view of the fence's tape. Compatible with the Kreg Precision Router Table.
Precision Router Table Insert Plate - Undrilled
PRS4038
Regular price $101.99Product Description
Solid, Flat, and Perfectly Level Mounting Surface
This rugged 3/8" thick (9.5mm) phenolic insert plate is designed to provide a solid, flat, and perfectly level mounting surface for your router. Measuring 9 1/4" x 11 3/4" (235mm x 298mm), it will accept almost any router (even large, heavy models) with ease.
No Unecessary Mounting Holes
Mounting your router to this plate is easy, but it isn't cluttered up with a bunch of extra predrilled mounting holes that you won't need. Instead, this plate has alignment marks on the underside that make it easy to center your router, plus a series of starting points that make it easy to drill the mounting holes for many popular routers. Just follow the detailed instructions that are included with the plate to have your router mounted accurately in no time.
Level-Loc Reducing Rings
The plate is equipped with our Level-Loc Reducing Rings that allow you to easily change the size of the opening around the router bit. These rings simply twist into place using an included ring wrench to lock in level and flush with the plate surface. The plate comes with three Level-Loc Rings: 1" (25mm), 1 3/16" (30mm) for use with universal-style guide bushings, and 2 5/8" (67mm).
Undrilled and Predrilled Plates
The Precision Router Table Insert Plate is available in three versions, so you can choose the one that best suits your needs.
Undrilled:Â This plate comes without any predrilled mounting holes. Alignment marks engraved on the underside make it easy to center and mount any router using the detailed instructions that are included with the plate.
Predrilled for Triton:Â This plate comes with predrilled holes and mounting hardware to fit Triton M0F001 and TRA001 Routers. With modification, the hole pattern also works with the Porter-Cable 7500 Series.
Predrilled for Porter-Cable and Bosch:Â This plate comes with predrilled holes and mounting hardware to fit the Porter-Cable 690 and 890 Series, along with the Bosch 1617.
Precision Router Table Insert Plate - Predrilled for Triton
PRS4036
Regular price $101.99Product Description
Solid, Flat, and Perfectly Level Mounting Surface
This rugged 3/8" thick (9.5mm) phenolic insert plate is designed to provide a solid, flat, and perfectly level mounting surface for your router. Measuring 9 1/4" x 11 3/4" (235mm x 298mm), it will accept almost any router (even large, heavy models) with ease.
No Unecessary Mounting Holes
Mounting your router to this plate is easy, but it isn't cluttered up with a bunch of extra predrilled mounting holes that you won't need. Instead, this plate comes with predrilled holes and mounting hardware to fit Triton M0F001 and TRA001 Routers. With modification, the hole pattern also works with the Porter-Cable 7500 Series.
Level-Loc Reducing Rings
The plate is equipped with our Level-Loc Reducing Rings that allow you to easily change the size of the opening around the router bit. These rings simply twist into place using an included ring wrench to lock in level and flush with the plate surface. The plate comes with three Level-Loc Rings: 1" (25mm), 1 3/16" (30mm) for use with universal-style guide bushings, and 2 5/8" (67mm).
Undrilled and Predrilled Plates
The Precision Router Table Insert Plate is available in three versions, so you can choose the one that best suits your needs.
Undrilled:Â This plate comes without any predrilled mounting holes. Alignment marks engraved on the underside make it easy to center and mount any router using the detailed instructions that are included with the plate.
Predrilled for Triton:Â This plate comes with predrilled holes and mounting hardware to fit Triton M0F001 and TRA001 Routers. With modification, the hole pattern also works with the Porter-Cable 7500 Series.
Predrilled for Porter-Cable and Bosch:Â This plate comes with predrilled holes and mounting hardware to fit the Porter-Cable 690 and 890 Series, along with the Bosch 1617.
Precision Router Table Insert Plate - Predrilled for Triton
PRS4034
Regular price $101.99Product Description
Solid, Flat, and Perfectly Level Mounting Surface
This rugged 3/8" thick (9.5mm) phenolic insert plate is designed to provide a solid, flat, and perfectly level mounting surface for your router. Measuring 9 1/4" x 11 3/4" (235mm x 298mm), it will accept almost any router (even large, heavy models) with ease.
No Unecessary Mounting Holes
Mounting your router to this plate is easy, but it isn't cluttered up with a bunch of extra predrilled mounting holes that you won't need. Instead, this plate comes with predrilled holes and mounting hardware to fit Triton M0F001 and TRA001 Routers. With modification, the hole pattern also works with the Porter-Cable 7500 Series.
Level-Loc Reducing Rings
The plate is equipped with our Level-Loc Reducing Rings that allow you to easily change the size of the opening around the router bit. These rings simply twist into place using an included ring wrench to lock in level and flush with the plate surface. The plate comes with three Level-Loc Rings: 1" (25mm), 1 3/16" (30mm) for use with universal-style guide bushings, and 2 5/8" (67mm).
Undrilled and Predrilled Plates
The Precision Router Table Insert Plate is available in three versions, so you can choose the one that best suits your needs.
Undrilled:Â This plate comes without any predrilled mounting holes. Alignment marks engraved on the underside make it easy to center and mount any router using the detailed instructions that are included with the plate.
Predrilled for Triton:Â This plate comes with predrilled holes and mounting hardware to fit Triton M0F001 and TRA001 Routers. With modification, the hole pattern also works with the Porter-Cable 7500 Series.
Predrilled for Porter-Cable and Bosch:Â This plate comes with predrilled holes and mounting hardware to fit the Porter-Cable 690 and 890 Series, along with the Bosch 1617.
Precision Router Table Setup Bars
PRS3400
Regular price $101.99Product Description
Whether you're working on a table saw, router table, or shaper, setting your tool to the precise height necessary is absolutely essential. The exclusive three-gauge design of the Precision Setup Bars makes them perfect for a wide variety of applications. The concave step on the bottom of each setup bar straddles your router bit or saw blade to allow for precise height adjustment. The step on the top edge of each setup bar acts as a gauge to test the depth of your completed cuts. The step on the end of each setup bar can be used to set the distance from a table saw blade to the fence, or a router bit to the fence. Each Precision Setup Bar is made from soft aluminum, designed to prevent damage to your router bit or saw blade in case they make contact during setup.
Precision Router Table Insert Plate Levelers
PRS3040
Regular price $31.29Product Description
Add An Insert Plate to Your Shop-Built Router Table
These unique levelers are the easiest way to add an insert plate to your shop-built router table. They eliminate the need for a supporting rabbet and feature a unique bottom-mount design that includes eight adjustable points of contact, four-corner lock-downs for stability, and locating tabs for easy installation.
Precision Router Table System
PRS1045
Regular price $815.99Product Description
Unmatched versatility, incredible adjustability
The Kreg Precision Router Table System combines unmatched versatility with incredible adjustability and ease of setup to take your woodworking projects to the next level. This powerful system offers a large, durable table top, a one-of-a-kind T-square style fence, and a durable steel stand that work together to create a router table that meets all of your precision-routing needs.
Multipurpose, self-squaring router table fence system
At the heart of the system is the Kreg's Precision Router Table Fence. This innovative, anodized-aluminum fence features a table saw-style T-Square adjustment system that ensures the fence will always stay parallel to the miter-gauge slot. The fence adjusts easily with just one hand and locks firmly in place with dual locks: a large paddle lock on the infeed end, and a quarter-turn lock on the outfeed end that prevents fence deflection. To ensure exact positioning, the fence features a measuring scale that allows you to position the fence and make adjustments based on the bit you are using. An included micro-adjust wheel makes setups simple to ensure precision.
Built-in dust collection and jointing feature
Independent sliding fence faces can be positioned exactly where needed to provide workpiece support close to the bit and to maximize chip collection into the fence's built-in dust port. Plus, two jointing rods are included. Just slide them into position behind the outfeed fence face, and the fence doubles as a jointer for putting perfect edges on boards.
High-performance precision router table top
The fence sits on Kregs large, durable Precision Router Table Top. This 24" x 32" (609mm x 813mm) table has a 1"-thick (25mm) MDF core that absorbs vibration and offers mass to help create a stable router table. A tough surface, made from high-pressure laminate, helps workpieces glide easily. Underneath, steel-reinforcing struts ensure that the table will stay flat to provide years of dependable service.
A keyhole slot in the table accepts the quarter-turn fence lock and allows the fence to be removed easily for freehand routing operations. In addition, the table comes equipped with a combination miter-gauge/T-track to accept a miter gauge and other accessories. Four (4) included Precision Insert-Plate Levelers keep plate and table top surfaces perfectly flush.
Heavy-duty, easily-adjustable steel stand
To make routing even easier, the table and fence sit atop a heavy-duty stand. Made from heavy-gauge steel, the stand can be adjusted from 31" to 39" (78.7cm to 99.1cm) high, and has levelers to compensate for uneven floors. Plus, the stand has predrilled holes that make it easy to mount accessories and to customize the stand.
Create a custom router table system
Create a custom router table system to meet all of your routing needs with the Kreg Precision Router Table Top and Kreg Multi-Purpose Shop Stand. Or, create your own system with a shop-made table top and stand.
Note: Router bit hole must be located 16" (406mm) from the right side of the table. Fits 1"-thick (25mm) tables without modification. Thinner or thicker tables may require modification.
Router Table Insert Plate Custom Drilling Program: Click here to watch the video on drilling mounting holes in your insert plate, or fill out this form and we'll help drill the holes for you.ÂPrecision Trak & Stop Kit
KMS8000
Regular price $203.99Product Description
Take the guesswork and your tape measure and pencil out of cutting wood to length
Our Precision Trak and Stop Kit allows you to turn a miter saw into a precise cutting system. Simply position the stop at the dimensions you'd like to cut using the precision lens cursor, place the board against the stop, and cut to that exact length every time. You build the support wings out of plywood (or another sheet material), and then add the Trak. Outfitting your saw to cut perfectly-sized workpieces couldn't be simpler!
Perfect for a Variety of Applications
The most common setup for the Precision Trak & Stop Kit is with a miter saw, but many woodworkers find it handy to add to their radial arm saw or drill press. No matter where you use the Precision Trak & Stop Kit, you'll find it much faster and accurate than any other wood-cutting method.
Production Stop
Designed to stand up to the rigors of repetitive cuts in an industrial environment, the Production Stop drops onto the top of the fence and features dual lens cursors for convenient use on either side of the blade.
Swing Stop
The Swing Stop gives you a precise measurement when you need it and swings out of the way when you don't Simply push a board into the curved face of the stop to push it temporarily up out of the way, or swing the stop up. Like the Production Stop, it features a Precision Lens Cursor for fast, pinpoint positioning.
Shop-Made Support Wings
Build a simple plywood or MDF box to match the height of your saw, and then add a back fence that reaches 21/4" (57mm) above the saw table for the stops to glide upon. Instructions and mounting hardware for the Trak are included.
Rigid Aluminum Fence
Incredibly strong and built-to-last, our anodized-aluminum Trak features an L-shaped base that makes alignment and mounting to any 3/4" (19mm) thick board a snap. The Trak has a groove along the top to accept the included self-adhesive measuring tapes. The Trak is split into four 2' (610mm) long sections, giving you setup options: 4' (1219mm) on each side of the saw, 2' (610mm) on one side and 6’ (1829mm) on the other, or all 8' (2438mm) on one side.
Production Stop
KMS7800
Regular price $39.49Product Description
Production-Ready Stop
Create a production-ready stop for your miter saw station, router table, table saw or miter gauge with this heavy-duty stop. It features dual cursors and durable construction that give it accuracy and toughness in one easy-to-use stop.
Precision Accuracy
The Production Stop features dual lens cursors with hairline indicators that allow you to use it on either side of the blade. Both cursors are adjustable, too, so you can fine tune the stop to your saw.
Rugged Construction
This stop is made from a thick aluminum extrusion so it's stiff and durable, but still lightweight. It's built to withstand years of heavy use, and to stay in place without deflecting.
Adaptable Design
The Production Stop is designed to work with Kreg Top Trak and Heavy-Duty Trak, so you can build your own fence, install the track, and use the stop. That gives you options, and means you can easily use the Production Stop on many types of tools. The stop simply drops into the track from the topside, allowing it to be quickly removed and repositioned.
Precision Miter Gauge System
KMS7102
Regular price $203.99Product Description
One miter gauge with everything you need for accuracy
Why spend your time calibrating a miter gauge when you can get amazing accuracy right out of the box? Our Precision Miter Gauge System requires no calibrating, and features positive stops at 0°, 10°, 22 1/2°, 30° and 45° to make it easy to cut accurate miters quickly.
Of course, when you do want to cut a more complicated angle, the easy-to-use Vernier scale allows for fast adjustments to 1/10th of a degree. Plus, the Precision Miter Gauge System offers a long, anodized-aluminum fence and stop system that let you easily make accurate, repeatable cuts.
Perfect Miters, Fast!
Precision is the name of the game for this CNC-milled miter gauge. We worked to build accuracy into every feature of this product, from the rugged aluminum fence, to the solid yet versatile Swing Stop, to the easy-to-use yet amazingly accurate Vernier scale. With all of its great features, this miter gauge will give you better, more accurate cuts to ensure project success.
Precision Lens Cursor
Similar to the type of lens found on a quality table saw rip fence, the clear lens features a high-visibility red line that makes it easy to set the Swing Stop for precise cuts, time after time.
No Play in the Miter Slot
Our extremely straight 24" (610mm) anodized-aluminum bar is 3/8" (9.5mm) thick by 3/4" (19mm) wide, and features five bar adjusters that you can use to eliminate "play" in the miter slot with the turn of a screw driver.
Swing Stop
The Swing Stop slides effortlessly along the fence of the Precision Miter Gauge and locks securely into place with the turn of a knob. It also features a curved foot that lets you easily swing the stop temporarily out of the way without having to remove it. That means you can quickly square one end of a board, flip it around, and then cut it to final length without ever moving the stop.
Add a Versatile Fence
The curved foot of the Swing Stop can be used as its "break-away" design allows you to add a versatile, heavy-duty fence to your Miter Gauge.
Straight Edge Guide XL
KMA4700
Regular price $135.99Product Description
Make perfectly straight cuts up to 8 feet in sheet goods with guided cutting
Cut sheet goods down to size with precision and ease by using the Kreg Straight Edge Guide. Work with material up to 8 feet and get the cuts you need whether you're using a circular saw, jigsaw, or trim router. (Works with most brands.)
The Kreg Straight Edge Guide XL offers an intuitive and approachable way to break down sheet goods. Your saw rides against the aluminum guide, allowing you to make straight and precise cuts. Guided cutting makes it easier than ever to see exactly where you'll cut so you can get the results you expect.
First, align your cuts quickly and precisely with the cutline indicators. Cutline indicators make alignment to your pencil marks easy, so you can work confidently knowing you'll make the cut exactly where you need it. Then secure the guide to your material using the low-profile GripMaxx clamps that are built right into the guide. And now you're ready to make a cut!
The Straight Edge Guide is also available with a smaller cutting capacity of 4 feet.
Precision Miter Gauge
KMS7101
Regular price $163.19Product Description
Adjustable Cutting Accuracy with Simplicity and Durability
Why spend your time calibrating a miter gauge when you can get factory-calibrated accuracy right out of the box? Our Precision Miter Gauge requires no calibrating, and features positive stops at 0°, 10°, 22 1/2°, 30° and 45°, making it easy to cut miters quickly. Of course, when you do want to cut a more complicated angle, the easy-to-use Vernier scale allows for fast adjustments to 1/10th of a degree.
Perfect Miters, Fast!
Precision is the name of the game for this CNC-milled miter gauge. We build accuracy into every feature of this product from the adjustable miter bar to the easy-to-use, incredibly accurate Vernier scale. With all of its great features, this miter gauge will give you better, more accurate cuts to ensure project success.
No Play in the Miter Slot
Our extremely straight 24" (610mm) anodized aluminum bar is 3/8" (9.5mm) thick by 3/4" (19mm) wide, and features five bar adjusters that you can adjust to eliminate "play" in the miter slot with the simple turn of a screw driver.
Straight Edge Guide Extension
KMA4600
Regular price $33.99Product Description
Expand the cutting capacity of your Straight Edge Guide
Add two extra feet of guide rail to your Kreg Straight Edge Guide in minutes. With this extension, you can make even longer cuts in sheet goods while using a circular saw, jigsaw, or trim router.
Shelf Pin Jig with 5mm Bit
KMA3220
Regular price $54.39Product Description
Add shelf pin holes to existing furniture or build custom shelves from scratch
If you're adding shelf pin holes to an existing piece of furniture or building shelves from scratch, the Shelf Pin Jig is the perfect tool for the job. Unlike other shelf pin guides, the Kreg Shelf Pin Jig features hardened-steel drill guides that ensure precise and straight drilling, so you'll get level, wobble-free shelves.
The Shelf Pin Jig also includes a dual-position, adjustable fence for custom hole placement, a locating pin for quick and accurate spacing reference, a jig extender that lets you connect multiple Shelf Pin Jigs together for high-speed production work, and an ultra-sharp 5mm brad-point bit with depth collar that can be stored on the bottom side of the Shelf Pin Jig when not in use.
Hardened-Steel Drill Guides
Unlike thin and flexible guides, the hardened-steel drill guides of the Kreg Shelf Pin Jig ensure each and every hole you drill is perfectly straight and true. Plus, all Kreg hardened-steel drill guides come with a lifetime warranty.
Perfect for Building or Adding Holes to Existing Furniture
The compact size of the Shelf Pin Jig makes it perfect for adding additional shelf pin holes in existing furniture, as well as for building projects from scratch. Need more length for additional speed? Connect multiple Shelf Pin Jigs together with the included Jig Extender.
Tool-Free Quick-Switch Fence
The built-in Quick-Switch Fence allows you to set your pin holes 1" (25mm) or 2" (50mm) from the edges of your project. The fence can be easily removed and switched to the other side of the jig, or removed completely when you need to work inside a confined space.
Standard Hole Size and Spacing
Kreg hardened-steel drill guides are centered on standard 32mm spacing. The jig comes complete with a 5mm drill bit that fits commonly available shelf-pins. A 1/4" (6mm) drill bit is also available separately.
Shelf Pin Jig Drill Bit (5mm)
KMA3215
Regular price $17.69Product Description
This 5mm high-speed steel drill bit replaces the bit that comes with the 5mm Kreg Shelf Pin Jig. Also works with the 1/4" (6mm) Kreg Shelf Pin Jig.
This high-speed steel drill bit allows you to drill 5mm shelf-pin holes with the Kreg Shelf Pin Jig. This bit features an ultra-sharp brad-point tip for exact centering and clean cutting, so that you'll get smooth holes for shelf pins. The 1/4" hex shank tightens easily into standard drill chucks, and fits quick-change chucks and adapters.
Shelf Pin Jig Drill Bit (1/4")
KMA3210
Regular price $17.69Replacement bit for the 1/4" Kreg Shelf Pin Jig. Also allows works with the 5mm Kreg Shelf Pin Jig.
This 1/4" (6mm) high-speed steel drill bit allows you to drill 1/4" shelf-pin holes with the Kreg Shelf Pin Jig.
Features a brad-point tip for exact centering and clean cutting so that you'll get smooth holes for shelf pins. The 1/4" hex shank tightens easily into standard drill chucks, and fits quick-change chucks and adapters.
Rip-Cut
KMA2685
Regular price $54.39Product Description
Turn an ordinary circular saw into a precision edge-guided cutting tool
Great projects start with high-quality cuts, and you can make those cuts — more easily than you ever imagined — using your circular saw plus the Rip-Cut Circular Saw Edge Guide.
The Kreg Rip-Cut turns your circular saw into a precision edge-guided cutting tool that makes straight, accurate, repeatable cuts in plywood, MDF, and other large sheets. With the Rip-Cut, you can cut with the confidence you want and the precision you need.
The Rip-Cut easily makes straight, accurate, repeatable cuts without measuring, marking, or having to keep the saw on the cut line. The Rip-Cut does this with a long edge guide that follows the straight edge of the sheet you are cutting. So, all you have to do is lock the saw in at the measurement you want — up to 24" — using the built-in measuring scale, and then make your cut.
With a built-in measuring scale, you don’t have to measure and mark each cut, either. Just lock the saw sled at your desired cut width, and you're all set, whether you need to cut one piece or make multiple pieces of the exact same size. Plus, the Rip-Cut makes it easier to cut down large sheets by yourself.
The Rip-Cut is very easy to use. Simply mount your saw to the Universal Sled — it accepts most left-blade or right-blade saws — and then slide the sled onto the aluminum rail. After a simple one-time calibration, you can lock in your cut width (up to 24") using the measuring scale and precision cursor. Then, just hold the edge guide against the edge of your sheet as you guide the saw. You’ll get straight, accurate, repeatable cuts easily every time.
Rail Set
KBS1010
Regular price $54.39Product Description
Universal Bench Rail Sets are sold in sets of four so you can customize your bench to fit your space, your projects, and your needs
Universal Bench Rail Sets are available in five options to accommodate a wide variety of projects needs: 14", 20", 28", 44", and 64". That means you can create a custom Universal Bench in 30 possible sizes, from 14" x 14" to 64" x 64". For example, the 14" Rail Set can help you create a Universal Bench that is 14"-wide (355mm) and/or 14"-deep (355mm).
Made from heavy-duty, 16-gauge steel, these durable rails are built to last for years to come.
Standard-Height Leg Set
KBS1000
Regular price $156.39Product Description
Universal Bench Legs combine with Universal Bench Rails (available in five lengths) to allow you to create your own heavy-duty, custom workbench to fit your space, your projects, and your needs. These legs are made from heavy-duty, 12-gauge steel, and are predrilled for all assembly hardware, plus have additional holes for attaching shop-built enclosures and other customizations.
Standard-Height Legs are adjustable from 31" to 39" (438mm to 584mm). Shorter Low-Height Legs are also available. To make your bench mobile, you can add 3" Dual-Locking Casters, sold separately.
Straight Edge Guide XL
KMA4700
Regular price $135.99Make perfectly straight cuts in full sheets with guided cutting.
Cut sheet goods down to size with precision and ease using a guide that shows exactly where you'll cut the Kreg Straight Edge Guide. For cuts up to 4 feet, use a circular saw, jigsaw, or trim router to get high quality results more easily than ever.
Set up quickly with intuitive, low-profile clamping.
Cut confidently thanks to GripMaxx anti-slip clamps.
Position your cuts perfectly every time with the retractable cutline indicators.
Get straight, precise results by cutting along the aluminum guide rail.
INCLUDES
Straight Edge Guide Extension
KMA4600
Regular price $33.99Expand the cutting capacity of your Straight Edge Guide *Sold Separately
Cut sheet goods down to size with precision and ease using a guide that shows exactly where you'll cut the Kreg Straight Edge Guide. For cuts up to 4 feet, use a circular saw, jigsaw, or trim router to get high quality results more easily than ever.
Set up quickly with intuitive, low-profile clamping.
Cut confidently thanks to GripMaxx anti-slip clamps.
Position your cuts perfectly every time with the retractable cutline indicators.
Get straight, precise results by cutting along the aluminum guide rail.
INCLUDES
Shelf Pin Jig Drill Bit (5mm)
KMA3215
Regular price $17.69Product Description
High-speed steel construction
Ultra-sharp brad point tip
Drills smooth holes fast
For use with the 5mm Kreg Shelf Pin Jig
1/4" (6mm) hex shank fits quick-change chucks
Shelf Pin Jig with 5mm Bit
KMA3220
Regular price $54.39Product Description
Add shelf pin holes to existing furniture or build custom shelves from scratch.
Six hardened-steel drill guides
Removable, dual-position fence
Standard 32mm hole spacing
Includes 5mm drill bit
Included locating pin for fast, accurate registration
Built-in storage for locating pin, drill bit, and depth collar
Kreg drill guides guaranteed for life
Precision Miter Gauge System
KMS7102
Regular price $203.99Product Description
One Miter Gauge with Everything You Need for Accuracy
Factory-calibrated; perfect right out of the box
Positive stops at 0°, 10°, 221/2°, 30°, and 45° (degrees)
Brass pin allows quick changes between positive stop angles
24" (610mm) bar with 5 bar adjusters eliminates "play" between the bar and miter slot
24" (610mm) Fence with Swing Stop and Self-Adhesive Measuring Tape
Production Stop
KMS7800
Regular price $39.49Product Description
Dual lens cursors for use on either side of saw blade
Designed to withstand use in a rugged shop environment
Compatible with Kreg Top Trak and Heavy-Duty Trak
Removable and repositionable
Swing Stop
KMS7801
Regular price $51.69Product Description
Get Repeatable Accuracy
Add repeatable accuracy to your miter saw, band saw, table saw fence, router table, and more with this versatile Swing Stop. It holds your desired measurement precisely, and swings out of the way easily when you want to cut without it.
Precision
The Swing Stop features a precision lens cursor with a hairline indicator that allows you to set dimensions exactly. Plus, the cursor is adjustable so you can easily fine tune the Swing Stop to your tool.
Versatile and Durable
When you want to use the Swing Stop, it stays where you set it thanks to its rugged aluminum construction and high-quality bushings that prevent deflection. When you want the stop out of the way, simply swing it up or slide your board into the front of the curved foot, and the Swing Stop will pop up out of the way for an unobstructed cut. The foot also has a small breakaway section that allows you to modify it easily to work on a fence that has an auxiliary face.
Adaptable Design
The Swing Stop is designed to work with Kreg Top Trak and Heavy-Duty Trak, so you can build your own fence, install the track, and use the stop. That gives you options and means you can easily use the Swing Stop on many types of tools. The stop simply drops into the track from the topside, allowing it to be quickly removed and repositioned.
Precision Trak & Stop Kit
KMS8000
Regular price $203.99Product Description
Take the guesswork out of cutting wood to length.
Turn your miter saw into a precise cutting system
Adjustable stops position your workpiece for repeatable, reliable results
Precision Lens Cursor for fast, accurate positioning
Production Stop and Swing Stop provide great results
L-shaped base design makes alignment and mounting easy
Includes 8' (2438mm) of Trak in 2' (610mm) long sections that can be used on the right or left side of the saw, or split between both sides
2 self-adhesive measuring tapes correctly measure cut lengths on both sides of the blade
Solid-Wood Pocket-Hole Plugs - Maple - 50CT
P-MAP
Regular price $14.99Product Description
Hide or Decoratively Accent Exposed Pocket Holes
Hide or decoratively accent exposed pocket holes
Highly-quality, trimmable, solid-wood plugs
For use with 1/2" to 11/2" thick material
Solid-wood plugs available in seven wood species
Solid-Wood Pocket-Hole Plugs - Oak - 50CT
P-OAK
Regular price $14.99Product Description
Hide or Decoratively Accent Exposed Pocket Holes
Hide or decoratively accent exposed pocket holes
Highly-quality, trimmable, solid-wood plugs
For use with 1/2"- to 11/2" thick material
Solid-wood plugs available in seven wood species
Precision Router Table Setup Bars
PRS3400
Regular price $101.99Product Description
Exclusive 3-gauge design makes them perfect for many applications
Concave step on bottom of each bar allows for precise height adjustment
Step on top of each bar acts as gauge to test depth of completed cuts
Step on end of each bar can set distance from table saw blade to fence, or router bit to fence
Bars are made from soft aluminum to prevent router bit and saw blade damage
Precision Router Table Insert Plate - Predrilled for Porter-Cable & Bosch
PRS4036
Regular price $101.99Product Description
Measures 91/4" x 113/4" (235mm x 298mm)
3/8" thick (9mm) phenolic insert plate
Comes with predrilled holes and mounting hardware
Designed to fit the Porter Cable 690 and 890 Series, along with the Bosch 1617
Level-Loc Reducing Rings
Available in 3 versions: undrilled, predrilled for Triton, and predrilled for Porter-Cable and Bosch
Custom Insert Plate Drilling Program
Precision Router Table Insert Plate - Undrilled
PRS4038
Regular price $101.99Product Description
Measures 91/4" x 113/4" (235mm x 298mm)
3/8" thick (9mm) phenolic insert plate
Comes without any predrilled mounting holes
Alignment marks make it easy to center and mount on almost any router
Level-Loc Reducing Rings
Available in 3 versions: undrilled, pre-drilled for Triton, and pre-drilled for Porter-Cable and Bosch
Custom Insert Plate Drilling Program
Precision Router Table Stop
PRS7850
Regular price $47.59Product Description
Flips out of the way when not in use
Low-profile, aluminum design
Precision Lens Cursor for clear, accurate view
Compatible with Kreg Precision Router Table
Protec-Kote Deck Screws - 700ct.
SDK-C2W-700
Regular price $93.89Product Description
700 Protec-Kote 2" (51mm) Deck Screws
Enough for a 10' (3048mm) x 20' (6096mm) deck with 16" (406mm) joists
For use with the Kreg Deck Jig
3 anti-corrosion layers to prevent rust
Perfect for many outdoor applications
Great for ACQ-treated lumber